All

Customer Reviews

  • 4.8
  • 4.6
  • 4.6
  • 4.7
Jim Jim
750 mm
Wow! Pleasantly surprised at the quality of these encoders.
Used on a Grizzly G0759 milling machine. Bolted right up to the X axis factory bolt holes with factory DRO
0
Steve Steve
1000 mm
Steve
This scale was a replacement for my hobby milliing machine that I have in my workshop. The reason I needed to replace it was that I made a mistake and broke my original that came with my Vevor Scale. The replacement arrive properly it was installed quickly with no issues. It works the way it should. Thank you again for your excellent customer service.
0
Chris Chris
100 mm
King of Castle
Added this linear encoder to the cross-slide of my mini lathe, works great! Bought the 200mm one for the carriage as well.
0
GridWork GridWork
200 mm
Great value, works so far.
The scales are pretty well made and look pretty good. Tracks well, can't say on the durability, time will tell. It should be ok as long as treated well.
0
Curtis Reinhardt Curtis Reinhardt
300 mm
Decent for the price
Well made, install took a few hours because I removed the table and slides. You could do it without removing table. But I wouldn't. Very happy so far
0
Artemio Cespedes Artemio Cespedes
150 mm
Great deal!
I bought three scales for my little mini-mill for the X, Y, and Z-axis, and have to say I thought these were a great bargain. They come with mounting brackets, scales covers, mounting screws, and end covers for the scales which was an unexpected surprise. Be aware that although these scales are advertised as Mophorn, they are labeled Vevor which was fine with me because they are of decent quality. Mounting the scales required some creativity, but that would be with any brand. Make sure you measure correctly for the length and keep in mind it will be easier to deal with a scale a little too long than one that is a little too short. The 3-axis display appears to be a more solid display than the Cozyel brand I have on my larger mill. Packaging was excellent and shipping was on time. The only negative was the display didn't have a ground wire in the package, but that wasn't a big deal since I made one in quick order.
0
Scott T. Scott T.
800 mm
A great, and cheap addition for my lathe
I used this on my 13-inch, Sheldon lathe. After some pondering, I was able to mount it to the cross slide using some existing holes. Works as it should and takes the guesswork and error out of that mechanism. Easy to read, [great for these ageing eyes] I am considering buying a longer one for the carriage.
0
Norma Norma
200 mm
My DRO readout is accurate and reliable again!
I was loosing my Zero point on my X-axis, so I bought the 800mm one based on the recommendations of others.
0
Dbl D Dbl D
250 mm
Great product!
These work great there is a little bit of creativity needed to install but when they are in they work excellent! They are very accurate as well I would definitely recommend them!
0
miguel gallegos miguel gallegos
550 mm
I works great!
It came very quickly And worked perfectly.
0

People Who Bought This Item Also Bought

855-385-1880 Monday to Friday, 08:00-17:00, GMT-7; Saturday to Sunday, 08:00 - 15:00, GMT-7 ©2009 - 2022 VEVOR All Rights Reserved