Tube Belt Sander Pipe Polisher Around Pipe Electric Sanding Machine 120v 800w

Tube Belt Sander Pipe Polisher Around Pipe Electric Sanding Machine 120v 800w

Available: In Stock
Product SKU: MDQYGDMJ000000001V1
$149.98 USD

We offer you a superior 120V 800W professional stainless steel pipe polisher machine.

The wraparound tube sander is for glazing,tarnishing, texturing, polishing and smoothing pipes without the use of water.

The user bears sole responsibility for any damage caused by improper use. Generally accepted accident prevention regulations and the enclosed safety information must be oberved.

How to ues:

Necessary Tools:
1.Pipe Polisher Assembly
2.Chuck Wrench (included)
3.Phillips Head Screwdriver
4.Rubber Backer(included)
Step1: Ensure that the machine is unplugged prior to beginning any assembly or disassembly procedures on the tool.
Step2: Under the largest rotor drum,locate the spindle nut that has flattened edges.Using the provided chuck wrench,hold the nut still while you turn the rotor drum to unscrew it from the spindle.
(if you are looking at the uncovered end of the rotor drum,you should turn the drum counter-clockwise).
Step3: Begin removing the black plastic safety guard by first removing the two screws at the far front of the guard assembly near the end of the fixed (non-moveable) portion of the arm assembly.
Step4: Moving to the area that was uncovered when you removed the main rotor drum,locate the four screws surrounding the spindle and using your screwdriver,unscrew and remove these screws.
At this point,you should be able to remove both the black plastic safety guard as well as the arm assemble.
Step5: Using the provided chuck wrench,hold the flattened spindle nut stationary and then screw on the rubber backer in much the same way you just removed the rotor drum in step 2.
If the Velcro side of the rubber backer is facing you,hold the spindle nut still with the chuxk wrench and turn the backer clockwise to attach it.
Step6: Screw the safety handle into the side of the polisher into one of the threaded holes just behind the spindle,near where the cooling vents for the engine assemble are located.
(Depending on if you are left or right handed you will want to choose a different side of the machine to attach the safety handle).
Congratulations,your Pipe Polisher id now ready to use as a standard multi-purpose grinder/polisher!

  • Switching on/continuous activation: push sliding switch. For continuous activation, now tilt downwards until it engages.
  • Switching off: Press the rear end of the slide switch and release
  • Voltage:120V, 60HZ
  • Suitable for polishing, grinding and cleaning
  • For round material and round tubes up to 180mm diameter
  • Infinitely variable speed control: 700-3000 U / min
  • Looping: up to 270 degrees
  • Belt speed: 2.7-8.5 m / s
Specifications:
  • Power: 800 Watts
  • Voltage: 110V±15%, 50/60Hz
  • Speed: 700-3000 revolutions / minute Max
  • Applicable pipe diameter(for round material and round tubes): 180mm/7.2inch
  • Belt speed: 2.7-8.5m / s
  • Sanding belt dimensions: 40mmx760mm/1.6x30inch
  • Total weight: 4.5 Kg/10lbs
  • Device weight: 4.0 Kg/8.9lbs
  • Warranty: 2 years
Package Content:
  • 1 x Pipe belt sander
  • 1 x Handle
  • 1 x Sanding belt
  • 2 x Carbon brushes
  • 1 x English

We offer you a superior 120V 800W professional stainless steel pipe polisher machine.

The wraparound tube sander is for glazing,tarnishing, texturing, polishing and smoothing pipes without the use of water.

The user bears sole responsibility for any damage caused by improper use. Generally accepted accident prevention regulations and the enclosed safety information must be oberved.

How to ues:

Necessary Tools:
1.Pipe Polisher Assembly
2.Chuck Wrench (included)
3.Phillips Head Screwdriver
4.Rubber Backer(included)
Step1: Ensure that the machine is unplugged prior to beginning any assembly or disassembly procedures on the tool.
Step2: Under the largest rotor drum,locate the spindle nut that has flattened edges.Using the provided chuck wrench,hold the nut still while you turn the rotor drum to unscrew it from the spindle.
(if you are looking at the uncovered end of the rotor drum,you should turn the drum counter-clockwise).
Step3: Begin removing the black plastic safety guard by first removing the two screws at the far front of the guard assembly near the end of the fixed (non-moveable) portion of the arm assembly.
Step4: Moving to the area that was uncovered when you removed the main rotor drum,locate the four screws surrounding the spindle and using your screwdriver,unscrew and remove these screws.
At this point,you should be able to remove both the black plastic safety guard as well as the arm assemble.
Step5: Using the provided chuck wrench,hold the flattened spindle nut stationary and then screw on the rubber backer in much the same way you just removed the rotor drum in step 2.
If the Velcro side of the rubber backer is facing you,hold the spindle nut still with the chuxk wrench and turn the backer clockwise to attach it.
Step6: Screw the safety handle into the side of the polisher into one of the threaded holes just behind the spindle,near where the cooling vents for the engine assemble are located.
(Depending on if you are left or right handed you will want to choose a different side of the machine to attach the safety handle).
Congratulations,your Pipe Polisher id now ready to use as a standard multi-purpose grinder/polisher!

  • Switching on/continuous activation: push sliding switch. For continuous activation, now tilt downwards until it engages.
  • Switching off: Press the rear end of the slide switch and release
  • Voltage:120V, 60HZ
  • Suitable for polishing, grinding and cleaning
  • For round material and round tubes up to 180mm diameter
  • Infinitely variable speed control: 700-3000 U / min
  • Looping: up to 270 degrees
  • Belt speed: 2.7-8.5 m / s
Specifications:
  • Power: 800 Watts
  • Voltage: 110V±15%, 50/60Hz
  • Speed: 700-3000 revolutions / minute Max
  • Applicable pipe diameter(for round material and round tubes): 180mm/7.2inch
  • Belt speed: 2.7-8.5m / s
  • Sanding belt dimensions: 40mmx760mm/1.6x30inch
  • Total weight: 4.5 Kg/10lbs
  • Device weight: 4.0 Kg/8.9lbs
  • Warranty: 2 years
Package Content:
  • 1 x Pipe belt sander
  • 1 x Handle
  • 1 x Sanding belt
  • 2 x Carbon brushes
  • 1 x English

Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.

Customer Reviews

Based on 12 reviews
75%
(9)
25%
(3)
0%
(0)
0%
(0)
0%
(0)
R
R.T.
the way to clean pipe without the high expense of big name brands
B
B.
Solid Sander. Gets the job done.
W
W.A.
Good product
d
d.
Well built.
V
V.C.
Great Value