230mm 3-jaw Rotary Axis Co2 Laser Engraver Cutting Machine For 60w/80w/100w/130w

230mm 3-jaw Rotary Axis Co2 Laser Engraver Cutting Machine For 60w/80w/100w/130w

Available: In Stock
Product SKU: JGDKJXZZ000000001V0
$168.49 USD


Features & Details

 

  • [PRODUCT PARAMETERS]- Tooth Form:Mxl, Number Of Teeth Z=20, Pitch Of Teeth P=2.032, Pitch Circle: φ12.936, Outer Circle: φ12.428±0.003,Ratio: 1:2.5 Synchronous Pulley Induction.
  • [EXCELLENT MOTOR]- This router rotary axis uses a 57-2A two-phase four-wire stepper motor with 1.8N force-torque, stable control, accurate positioning, and high conversion rate.
  • [ACCURATE CHUCK]- The 80mm chuck features high accuracy and good durability, suitable for clamping various types of materials. After special processing, the chuck is not easy to rust.
  • [PRECISE TAIL]- The high-precision tail top installed on the bottom plate can freely adjust the length of the thimble as required, featuring certain strength, toughness, and wear resistance.
  • [SOLID BASE]- The base of the CNC rotational rotary axis adopts special thickening treatment, which makes the machine have good stability during the operation.


Extraordinary Quality

The all-metal body has a particular strength, toughness, and wear resistance. At the same time, it is not easy to rust after special processing.


Strong  Stepper Motor

The rotary axis and tailstock adopt a two-phase stepper motor with a high conversion rate, stable control, and precise positioning.


Precision Chuck

80mm chuck with high precision provides better precise positioning and good concentricity, suitable for clamping various types of materials, high compatibility.


High-precision Tail

High-quality high-precision tail top with better adaptability can adjust the length of the thimble according to actual needs.


Solid Base

The base of the machine is made of sturdy material and has been thickened to ensure its stability during operation.


Wide Application

The four-axis engraving machine is widely used in the scroll, stigma, bamboo and also can be applied in cylindrical, curved, round, etc.

CNC Rotational Rotary Axis
We offer you a superior rotational rotary axis with 80mm 3-jaw scroll chuck. Because of the rotary movement of the fourth rotary axis, it is available for the stereoscopic process for a cylindrical, curved, round, etc. The four-axis engraving machine is widely used in the scroll, stigma, bamboo, and so on so like.
  • Product parameters
  • Excellent Motor
  • Accurate Chuck
  • Precise Tail
Package Content:
Specifications
  • Rated Voltage:2.07v Dc
  • Phase Resistance (20℃)  1.38×(1±15%)ω/Phase
  • The Maximum Statictorque:≥780mn.M
  • Swing( Shaft To See ):A-Ab-B-Clockwise Direction
  • Maximum No-Load Running Frequency:≥2500pps
  • Electrical Strength:Ac600v/1ma/1s
  • Rotor Inertia:220g.㎡
  • Step Angle:1.8°±0.09°
  • Rated Current:Dc 1a/Phase
  • Inductance (1khz):30×(1±20%)Mh/Phase
  • Detent Rorque:320g.Cm Ref.
  • Maximum No-Loadstart Frequency:≥1500 Pps
  • Insulation Resistance:≥100mω(Dc 500v)
  • Insulation Grade:B
  • Quality 0.8kg Ref.
  • Material Of Pulley:H62
  • Tooth Form:Mxl
  • Number Of Teeth Z=20
  • Pitch Of Teeth P=2.032
  • Pitch Circle:φ12.936
  • Outer Circle:φ12.428±0.003
  • Product Dimensions: 152 × 4500 ×178 (H/L/W Mm)
Package Content
  • 1 x Rotary Axis


Features & Details

 

  • [PRODUCT PARAMETERS]- Tooth Form:Mxl, Number Of Teeth Z=20, Pitch Of Teeth P=2.032, Pitch Circle: φ12.936, Outer Circle: φ12.428±0.003,Ratio: 1:2.5 Synchronous Pulley Induction.
  • [EXCELLENT MOTOR]- This router rotary axis uses a 57-2A two-phase four-wire stepper motor with 1.8N force-torque, stable control, accurate positioning, and high conversion rate.
  • [ACCURATE CHUCK]- The 80mm chuck features high accuracy and good durability, suitable for clamping various types of materials. After special processing, the chuck is not easy to rust.
  • [PRECISE TAIL]- The high-precision tail top installed on the bottom plate can freely adjust the length of the thimble as required, featuring certain strength, toughness, and wear resistance.
  • [SOLID BASE]- The base of the CNC rotational rotary axis adopts special thickening treatment, which makes the machine have good stability during the operation.


Extraordinary Quality

The all-metal body has a particular strength, toughness, and wear resistance. At the same time, it is not easy to rust after special processing.


Strong  Stepper Motor

The rotary axis and tailstock adopt a two-phase stepper motor with a high conversion rate, stable control, and precise positioning.


Precision Chuck

80mm chuck with high precision provides better precise positioning and good concentricity, suitable for clamping various types of materials, high compatibility.


High-precision Tail

High-quality high-precision tail top with better adaptability can adjust the length of the thimble according to actual needs.


Solid Base

The base of the machine is made of sturdy material and has been thickened to ensure its stability during operation.


Wide Application

The four-axis engraving machine is widely used in the scroll, stigma, bamboo and also can be applied in cylindrical, curved, round, etc.

CNC Rotational Rotary Axis
We offer you a superior rotational rotary axis with 80mm 3-jaw scroll chuck. Because of the rotary movement of the fourth rotary axis, it is available for the stereoscopic process for a cylindrical, curved, round, etc. The four-axis engraving machine is widely used in the scroll, stigma, bamboo, and so on so like.
  • Product parameters
  • Excellent Motor
  • Accurate Chuck
  • Precise Tail
Package Content:Specifications
  • Rated Voltage:2.07v Dc
  • Phase Resistance (20℃)  1.38×(1±15%)ω/Phase
  • The Maximum Statictorque:≥780mn.M
  • Swing( Shaft To See ):A-Ab-B-Clockwise Direction
  • Maximum No-Load Running Frequency:≥2500pps
  • Electrical Strength:Ac600v/1ma/1s
  • Rotor Inertia:220g.㎡
  • Step Angle:1.8°±0.09°
  • Rated Current:Dc 1a/Phase
  • Inductance (1khz):30×(1±20%)Mh/Phase
  • Detent Rorque:320g.Cm Ref.
  • Maximum No-Loadstart Frequency:≥1500 Pps
  • Insulation Resistance:≥100mω(Dc 500v)
  • Insulation Grade:B
  • Quality 0.8kg Ref.
  • Material Of Pulley:H62
  • Tooth Form:Mxl
  • Number Of Teeth Z=20
  • Pitch Of Teeth P=2.032
  • Pitch Circle:φ12.936
  • Outer Circle:φ12.428±0.003
  • Product Dimensions: 152 × 4500 ×178 (H/L/W Mm)
Package Content
  • 1 x Rotary Axis

Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.

Customer Reviews

Based on 10 reviews
90%
(9)
10%
(1)
0%
(0)
0%
(0)
0%
(0)
L
L.R.C.
Awesome
T
T.D.
Easy to use
C
C.
Good price
L
L.
Awesome!
J
J.B.
exactly what i needed