Home Brewing Barley Maltmill Grain Crusher Malt Mill Equipment 2 Roller

Home Brewing Barley Maltmill Grain Crusher Malt Mill Equipment 2 Roller

Available: In Stock
Product SKU: DY168SYYMJ0000001V0
$69.99 USD

This DY-168 Grain Mill is constructed using materials that will last a lifetime. Cold rolled steel for the rollers, and 6061 aluminum for body and hopper and oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other cereals. It is provided with adjustable 2 rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future. The 2 rollers design has the main advantage that it draws the grain better and gives improved throughput.


This equipment is perfect for large batches and high efficiency milling. With two rollers, all your grain will be crushed twice in one cycle. The crush is through the fixed gap between the top two rollers. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.


The aluminum hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of 0.070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.

Note

You will need to supply or build a base to set the mill over a grain bin or 5 gallon bucket.
Features:
  • Width and roller diameter is optimized for use with power drill
  • Adjustable rollers at both ends to give uniform crush
  • 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
  • 6" long adjustable gap
  • Fully adjustable mill
  • 0.060" fixed primary gap, 0-0.065" fully-adjustable secondary gap
  • Dual eccentric adjusters built from carbon steel for no galling
  • 8 lbs / minute is average throughput
  • 6" x 1.5" diameter stainless steel rollers
  • Crankshaft can be turned clockwise or counterclockwise
  • Durable alloy frame
  • SAE 841 oil impregnated bronze bushings
  • Heavy-duty 2-roller mill with adjustable secondary gap-spacing
  • Integral drive shaft and axles
  • Mill can be hand-cranked or motorized with a corded electric drill
  • You will need to supply or build a base


Specifications:
  • Condition: New
  • Color: Silver
  • Type: Grain crusher
  • 2 rollers: Carbon steel
  • Grinder housing: Aluminum 6061
  • Hoppers: Aluminum 6061
  • Total height: 260mm / 10.2"
  • Hopper dimensions at top: 220 x 210mm / 8.7" x 8.3"
  • Footprint size of grinder: 140 x 80mm / 9.4" x 3.1"
  • Roller dimension: 76 x 150 x 50mm / 3" x 6" x 2"
  • Single roller: ø 38 x 150mm / 1.5" x 6"
  • Adjustable distance: 0.635 - 2,54 mm / 0.025" - 0.1"
  • Crank handle: 120mm / 4.7"
  • Package size: 310 x 265 x 150mm / 12" x 10" x 6"
  • G.W.: 4.1kg / 9lbs


Package Content:
  • 1 pc Malt Mill
  • 4 pcs Hoppers
  • 1 pc Crank handle


This DY-168 Grain Mill is constructed using materials that will last a lifetime. Cold rolled steel for the rollers, and 6061 aluminum for body and hopper and oil impregnated brass bushings. The grain mill is professional in grinding barley, wheat and other cereals. It is provided with adjustable 2 rollers which can be crushed cereal well and peeled shell off perfectly, so as to be good for brewing beer in future. The 2 rollers design has the main advantage that it draws the grain better and gives improved throughput.


This equipment is perfect for large batches and high efficiency milling. With two rollers, all your grain will be crushed twice in one cycle. The crush is through the fixed gap between the top two rollers. The initial pass slightly flattens the grain, getting it ready for the next crush that breaks apart the grains and loosens the starch with minimal husk damage.


The aluminum hopper can hold up to 11 lbs of grains and the roller body features an alloy block frame that houses three steel rollers on oil-impregnated bronze bushings. The drive shaft and all axles are integral to the roller, which makes clockwise or counter-clockwise drive possible. A hand crank is included, but the mill can be easily motorized with a corded electric drill. You don't need any additional attachments, just stick the drill on and go. Stainless knurled knobs allow a gap spacing adjustment range of 0.070". Adjusting is simple - just loosen the adjustment screws, adjust the gap and tighten the adjustment screws.

Note

You will need to supply or build a base to set the mill over a grain bin or 5 gallon bucket.
Features:
  • Width and roller diameter is optimized for use with power drill
  • Adjustable rollers at both ends to give uniform crush
  • 12 TPI knurl to efficiently pull grain through rollers while leaving hull intact to form an excellent filter bed for sparging
  • 6" long adjustable gap
  • Fully adjustable mill
  • 0.060" fixed primary gap, 0-0.065" fully-adjustable secondary gap
  • Dual eccentric adjusters built from carbon steel for no galling
  • 8 lbs / minute is average throughput
  • 6" x 1.5" diameter stainless steel rollers
  • Crankshaft can be turned clockwise or counterclockwise
  • Durable alloy frame
  • SAE 841 oil impregnated bronze bushings
  • Heavy-duty 2-roller mill with adjustable secondary gap-spacing
  • Integral drive shaft and axles
  • Mill can be hand-cranked or motorized with a corded electric drill
  • You will need to supply or build a base


Specifications:
  • Condition: New
  • Color: Silver
  • Type: Grain crusher
  • 2 rollers: Carbon steel
  • Grinder housing: Aluminum 6061
  • Hoppers: Aluminum 6061
  • Total height: 260mm / 10.2"
  • Hopper dimensions at top: 220 x 210mm / 8.7" x 8.3"
  • Footprint size of grinder: 140 x 80mm / 9.4" x 3.1"
  • Roller dimension: 76 x 150 x 50mm / 3" x 6" x 2"
  • Single roller: ø 38 x 150mm / 1.5" x 6"
  • Adjustable distance: 0.635 - 2,54 mm / 0.025" - 0.1"
  • Crank handle: 120mm / 4.7"
  • Package size: 310 x 265 x 150mm / 12" x 10" x 6"
  • G.W.: 4.1kg / 9lbs


Package Content:
  • 1 pc Malt Mill
  • 4 pcs Hoppers
  • 1 pc Crank handle


Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.