Electric Cloth Cutter 4" Fabric Leather Cutting Machine Round Scissors Rotary

Electric Cloth Cutter 4" Fabric Leather Cutting Machine Round Scissors Rotary

Available: In Stock
Product SKU: LJYJ-100AGYDJD001V1
$69.95 USD

This is a brand new YJ-100A 4" octagon cloth cutting machine with 8-sided blade. This fabric cutter cuts up to 15 layers of fabric and is suitable for cutting various fabrics such as cotton, wool, knit fabric, silk and sponge.
Before cutting, connect the attachment code to the machine and grind the edge sharp by pushing the spring loaded projection grinding switch for several times.

Application:

Clothing (leather, belts, bags, etc.), textiles (weaving, ribbon, rope) non-woven fabrics, paper industry(cardboard boxes, paper products), blankets, carpets and other crafts and gifts furniture, Industry, hat industry.

Instructions:
A. Greasing.
1. Every 50 hours: Give small quantity grease thru grease cup and turn the cap in.
2. Every 150 hours: Release cap and fill the grease.
B. Lubrication:
Every 10-20 hours: Give oil to oiler until oil comes in contact with the surface of edge.
C. Adjustment of Resharperner:
While the grinding wheel wears loos stop nut of resharperner-arm and rectify the resharpner position so as to the grinding wheel keeps proper contact with the edge.
D. Replacement of knife
1. Remove the guard to upward direction.
2. Pull oiler and adjust the angle to face toward the position.
3. Remove safety plate releasing lock nut.
4. Remove lock nut by turning it loft. Use the wrench attached.(If the also turns together with lock nut, lock the to the standard inseting lock shaft to hole in the knife. The corresponding hole for locking is also provided in the standard.)
5. Remove knife.
6. Be sure that the with a trademark should be facing outwards when resetting the knife.
7. Adjust the position of resharpener after each replacement of knife.
E. Replacement of Carbon Brush.
1. Tool much weaving of carbon brush will cause motor troubles. Carbon brush must be replaced when it wears to 5-6mm.
2. Carbon brush cap is replaced by turning it left by attached wrench.
3. Always replace right and left carbon brushed simltaneously.
  • Liftable protective device
  • High-speed steel blade is sharp, durable and sturdy.
  • Nickel-plated rollers have good rust resistance.
  • With sharpening function, press the sharpener automatically to sharpen the knife.
  • The all-copper motor with strong power has excellent electrical conductivity, durable and not easy to be damaged.
  • The thickened casing and base make the motor vibration small. The machine runs smoothly during the cutting process, and it has good heat dissipation performance.
  • The lower is connected to the spring, which can freely adjust the angle between the lower and the blade, reducing the problem of blade wear.
Specifications:
  • Voltage: 110V
  • Power: 100W
  • Blade Size: 100mm/4 Inch
  • Cutting Thickness: 25.4mm/1 Inch
  • Net Weight: 6.4 Pounds
  • Blade Shape: Octagon
  • Blade Material: Alloy Steel
  • Worm Gear Material: Nylon
  • Motor Material: Silicon Steel Sheet, Enameled Wire, Commutator
Package Content:
  • 1 X YJ-100A Cloth Cutting Machine
  • 1 X Wrench
  • 1 X Grinding Wheel
  • 2 X Brushes
  • 1 X Blade Wrench
  • 1 X Power Cord
  • 1 X English Manual

This is a brand new YJ-100A 4" octagon cloth cutting machine with 8-sided blade. This fabric cutter cuts up to 15 layers of fabric and is suitable for cutting various fabrics such as cotton, wool, knit fabric, silk and sponge.
Before cutting, connect the attachment code to the machine and grind the edge sharp by pushing the spring loaded projection grinding switch for several times.

Application:

Clothing (leather, belts, bags, etc.), textiles (weaving, ribbon, rope) non-woven fabrics, paper industry(cardboard boxes, paper products), blankets, carpets and other crafts and gifts furniture, Industry, hat industry.

Instructions:
A. Greasing.
1. Every 50 hours: Give small quantity grease thru grease cup and turn the cap in.
2. Every 150 hours: Release cap and fill the grease.
B. Lubrication:
Every 10-20 hours: Give oil to oiler until oil comes in contact with the surface of edge.
C. Adjustment of Resharperner:
While the grinding wheel wears loos stop nut of resharperner-arm and rectify the resharpner position so as to the grinding wheel keeps proper contact with the edge.
D. Replacement of knife
1. Remove the guard to upward direction.
2. Pull oiler and adjust the angle to face toward the position.
3. Remove safety plate releasing lock nut.
4. Remove lock nut by turning it loft. Use the wrench attached.(If the also turns together with lock nut, lock the to the standard inseting lock shaft to hole in the knife. The corresponding hole for locking is also provided in the standard.)
5. Remove knife.
6. Be sure that the with a trademark should be facing outwards when resetting the knife.
7. Adjust the position of resharpener after each replacement of knife.
E. Replacement of Carbon Brush.
1. Tool much weaving of carbon brush will cause motor troubles. Carbon brush must be replaced when it wears to 5-6mm.
2. Carbon brush cap is replaced by turning it left by attached wrench.
3. Always replace right and left carbon brushed simltaneously.
  • Liftable protective device
  • High-speed steel blade is sharp, durable and sturdy.
  • Nickel-plated rollers have good rust resistance.
  • With sharpening function, press the sharpener automatically to sharpen the knife.
  • The all-copper motor with strong power has excellent electrical conductivity, durable and not easy to be damaged.
  • The thickened casing and base make the motor vibration small. The machine runs smoothly during the cutting process, and it has good heat dissipation performance.
  • The lower is connected to the spring, which can freely adjust the angle between the lower and the blade, reducing the problem of blade wear.
Specifications:
  • Voltage: 110V
  • Power: 100W
  • Blade Size: 100mm/4 Inch
  • Cutting Thickness: 25.4mm/1 Inch
  • Net Weight: 6.4 Pounds
  • Blade Shape: Octagon
  • Blade Material: Alloy Steel
  • Worm Gear Material: Nylon
  • Motor Material: Silicon Steel Sheet, Enameled Wire, Commutator
Package Content:
  • 1 X YJ-100A Cloth Cutting Machine
  • 1 X Wrench
  • 1 X Grinding Wheel
  • 2 X Brushes
  • 1 X Blade Wrench
  • 1 X Power Cord
  • 1 X English Manual

Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.

Customer Reviews

Based on 18 reviews
89%
(16)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
T
T.W.
Cloth Cutter shipped QUICK✨
F
F.M.
Genial...
W
W.M.
like nothing. Thank you so
P
P.
Great for cutting puffy material such is cotton!
A
A.F.
Five Stars

Customer Reviews

Based on 18 reviews
89%
(16)
11%
(2)
0%
(0)
0%
(0)
0%
(0)
T
T.W.
Cloth Cutter shipped QUICK✨
F
F.M.
Genial...
W
W.M.
like nothing. Thank you so
P
P.
Great for cutting puffy material such is cotton!
A
A.F.
Five Stars