Illustration on function parameters
2. Temperature error correction F1: When the display temperature and actual temperature are different, this parameter can be corrected to make the two identical, F1 = actual temperature - display temperature.
3. When the temperature sensor meets “Measuring temperature = set temperature – return difference temperature F2, the red indicator is on which means an automatic access to the heating device; When the temperature sensors meets “measuring temperature = set temperature," the red heat indicator is off and the yellow ready indicate light is on which means the heating device is cut off.
4. Digital temperature controller: It is on the control panel and mainly in charge of controlling the heating temperature of the heat pipe to ensure the water temperature inside the tank.
Cleaning and Maintenance
1). In case of accidents, cut off electricity when cleaning the machine
2). Every time after use, clean the machine with a wet towel. Don’t use erosive detergent. Pay special attention when cleaning operation panel, since if water is let inside, electric parts will be damaged and there will be short circuit
3). Do not wash the machine directly with running water
4). Water must be drained out of the tank after it is cooled down
Note
Adjust the temperature to 70-80℃ / 158-176℉ until the chocolate melts, then adjust the temperature according to your own needs.
- Under very careful, long-term research
- Digital control renders the temperature more accurate and scientific
- Water-barrier heating design, easy temperature control, effectively avoiding chocolate scorch in the bottom of the chamber
- Chocolate can be more evenly melted
- With our humanized design concept
- Very easy to operate since it has exhaust steam and drainage system
- Made of best grade stainless steel, type 304#, corrosion resistance and easy to clean
- The temperture is between 30-80℃ / 86-176℉, satify different personal needs without damaging the ingredients of chocolate
- Automatic temperture control system ( automatically stop heating when the temperature is lower than setting, and vice versa)
- Suitable for heating chocolate, cream and milk
- Can also be applied to candles and soaps
- Type: C2002-3
- Condition: New
- Brand: Vevor
- Power: 1500 W
- Voltage: 110 V 50 HZ
- capacity: 12kg
- Machine size: 65 x 36 x 18cm / 25.59" x 14.17" x 7.09"
- Package size: 72 x 43 x 26cm / 28.35" x 16.93" x 10.27"
- Net weight: 10kg / 22.05lbs
- Gross weight: 13kg / 28.66lbs
- Warranty: 2 years
- 1 XC2002-3 Electric Water Heating Chocolate Melter
Illustration on function parameters
1. Return difference temperature F2: F2 = set temperature – lower limit temperature, assuming that the temperature should be controlled between 20 ℃ and 22 ℃, set temperature as 22 ℃, the lower limit temperature as 20 ℃, then the return difference temperature F2 = 2 ℃ (default return difference as 2 ℃).2. Temperature error correction F1: When the display temperature and actual temperature are different, this parameter can be corrected to make the two identical, F1 = actual temperature - display temperature.
3. When the temperature sensor meets “Measuring temperature = set temperature – return difference temperature F2, the red indicator is on which means an automatic access to the heating device; When the temperature sensors meets “measuring temperature = set temperature," the red heat indicator is off and the yellow ready indicate light is on which means the heating device is cut off.
4. Digital temperature controller: It is on the control panel and mainly in charge of controlling the heating temperature of the heat pipe to ensure the water temperature inside the tank.
Cleaning and Maintenance
1). In case of accidents, cut off electricity when cleaning the machine
2). Every time after use, clean the machine with a wet towel. Don’t use erosive detergent. Pay special attention when cleaning operation panel, since if water is let inside, electric parts will be damaged and there will be short circuit
3). Do not wash the machine directly with running water
4). Water must be drained out of the tank after it is cooled down
Note
Adjust the temperature to 70-80℃ / 158-176℉ until the chocolate melts, then adjust the temperature according to your own needs.
- Under very careful, long-term research
- Digital control renders the temperature more accurate and scientific
- Water-barrier heating design, easy temperature control, effectively avoiding chocolate scorch in the bottom of the chamber
- Chocolate can be more evenly melted
- With our humanized design concept
- Very easy to operate since it has exhaust steam and drainage system
- Made of best grade stainless steel, type 304#, corrosion resistance and easy to clean
- The temperture is between 30-80℃ / 86-176℉, satify different personal needs without damaging the ingredients of chocolate
- Automatic temperture control system ( automatically stop heating when the temperature is lower than setting, and vice versa)
- Suitable for heating chocolate, cream and milk
- Can also be applied to candles and soaps
- Type: C2002-3
- Condition: New
- Brand: Vevor
- Power: 1500 W
- Voltage: 110 V 50 HZ
- capacity: 12kg
- Machine size: 65 x 36 x 18cm / 25.59" x 14.17" x 7.09"
- Package size: 72 x 43 x 26cm / 28.35" x 16.93" x 10.27"
- Net weight: 10kg / 22.05lbs
- Gross weight: 13kg / 28.66lbs
- Warranty: 2 years
- 1 XC2002-3 Electric Water Heating Chocolate Melter
Shipping Policy
Delivery Times
Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out.
We adopt FEDEX Ground ( UPS Ground ) to ship your orders.
FEDEX Ground ( UPS Ground ) : Shipping Time 3-7 business days.
About Modification
Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.
The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.
International Purchase
Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.
Return Policy
Every single product is backed by a 24-months Warranty and a 90-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.
If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.
Satisfying Guarantee for Every Purchase
Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 90 days of delivery in original packaging and with proof of purchase from Vevor.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
- All returns must be pre-approved. Unauthorized returns will not be accepted.
- Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
- The same warranty is provided for replaced products as the returned ones.
If you are shipping the product
- Carefully pack the item(s) in original package.
- Stick the shipping label we offered on the outer
- Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
- For assistance on return, please call Vevor on (916) 273-9717or send a message to: service@vevor.com.
