16"x16" Silkscreen Flash Dryer Printing Curing Diy T-shirt Machine Heating Us

16"x16" Silkscreen Flash Dryer Printing Curing Diy T-shirt Machine Heating Us

Available: In Stock
Product SKU: 16*16WKSHGJ000001V1
$141.79 USD


Features & Details


  • [EXCELLENT QUALITY]- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
  • [LARGE DRYING AREA]- The effective heating area of the dryer reaches 16" x 16" (41 x 41 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
  • [ACCURATE THERMOSTAT & SENSOR]- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
  • [ADJUSTABLE HEIGHT]- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30"-48".
  • [SOLID X-SHAPED BASE]- The base of the 16x16 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.


Extraordinary Quality


Thanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance.


Large Drying Area


The effective heating area of the dryer is 16" x 16" (41 x 41 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.


Precise Thermostat & Sensor

This flash dryer 16x16 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.


1700W Heating Tuber

1700W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.


Adjustable Height


On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range.


X-shaped Base

Compared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly.

16" x 16" Flash Dryer
A professionally built, excellent flash dryer. It has an 16" x 16" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck. 
  • Excellent Quality
  • Large Drying Area
  • Adjustable Height
  • Accurate Thermostat & Sensor
Package Content:
Specifications
  • Input Power:110V/60Hz
  • Minimum Height:30"
  • Maximum Height:48"
  • Heating Area:16" x 16"
  • Base Dimensions:38" x 38"
  • Maximum Power Usage:1700 Watts
  • Top Dimensions:29" x 19"
  • Shipped Weight: 53 lbs
  • Max Temp:100 degrees Celsius
  • Average Current Draw:13 Amps
  • Maximum Current Draw:16.5 Amps
  • Average Power Usage:1350 Watts
  • Assembled Dimensions:38" x 38" x 48"
  • Suggest Temp Range:0-100 degrees Celsius
Package Content
  • 1 Set of 1700W Flash Dryer With Temperature Display


Features & Details


  • [EXCELLENT QUALITY]- This screen printing flash dryer is all made of steel structure, using the advanced classic spraying and chrome plating. The silk screen dryer is exquisite and fine in the craft.
  • [LARGE DRYING AREA]- The effective heating area of the dryer reaches 16" x 16" (41 x 41 cm). The heating tubes are wrapped by a stainless steel wire mesh that has higher thermal efficiency, especially more practical for large areas that need to be dried.
  • [ACCURATE THERMOSTAT & SENSOR]- Equipped with accurate temperature controller and sensitive sensor, the temperature control range is 0-100℃. When the sensor detects that the heating area has reached the set temperature, the flash dryer for screen printing will automatically stop heating in time.
  • [ADJUSTABLE HEIGHT]- By adjusting the height adjustment knob, you can adjust the corresponding height as required. And the range of adjustment is from 30"-48".
  • [SOLID X-SHAPED BASE]- The base of the 16x16 flash dryer adopts the X-shaped design, which saves the space area and makes the flash dryer more stable. The traditional cross design is likely to cause injuries and bumps for people, but our flash dryers overcome this shortcoming.


Extraordinary Quality


Thanks to using the steel structure as well as the advanced classic spraying, our flash dryers' performance is better than other products on the market. They are more reliable and stable performance.


Large Drying Area


The effective heating area of the dryer is 16" x 16" (41 x 41 cm), which is very practical for large areas that need to be dried. Wrapped by stainless steel wire mesh, heating tubes have higher thermal efficiency and save energy.


Precise Thermostat & Sensor

This flash dryer 16x16 equips an accurate temperature controller and sensor. You can adjust the temperature as required, 0-100℃temperature control range. If the heating area has reached the set temperature, the machine will automatically stop heating in time.


1700W Heating Tuber

1700W high-power heating pipe accelerates the speed of ink drying. The reflective aluminum plate at the rear to make the thermal efficiency higher and save energy. It uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area.


Adjustable Height


On the below support bar, there are two height adjustment knobs. The height can be adjusted up and down according to what you need, 80 cm-120 cm adjustment range.


X-shaped Base

Compared with the traditional cross design, our flash dryer screen printing adopts the X-shaped design, which not only saves the space area but also makes the flash dryer more stable. Four wheels offer convenience for the machine to move quickly.

16" x 16" Flash Dryer
A professionally built, excellent flash dryer. It has an 16" x 16" heating grid opening, wheels, and there is no special wiring required. Additionally, it uses a panel with hundreds of wires flowing through it to provide consistent heat throughout the heating area. Foundation is compatible with heating box, stable, saving-space, and overcoming the flaw caused by traditional "十" that quickly gets a knock and stuck. 
  • Excellent Quality
  • Large Drying Area
  • Adjustable Height
  • Accurate Thermostat & Sensor
Package Content:Specifications
  • Input Power:110V/60Hz
  • Minimum Height:30"
  • Maximum Height:48"
  • Heating Area:16" x 16"
  • Base Dimensions:38" x 38"
  • Maximum Power Usage:1700 Watts
  • Top Dimensions:29" x 19"
  • Shipped Weight: 53 lbs
  • Max Temp:100 degrees Celsius
  • Average Current Draw:13 Amps
  • Maximum Current Draw:16.5 Amps
  • Average Power Usage:1350 Watts
  • Assembled Dimensions:38" x 38" x 48"
  • Suggest Temp Range:0-100 degrees Celsius
Package Content
  • 1 Set of 1700W Flash Dryer With Temperature Display

Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.