370w Saw Blade Grinder Sharpener Machine Mill Grind Decoration Carbide Hot

370w Saw Blade Grinder Sharpener Machine Mill Grind Decoration Carbide Hot

Available: In Stock
Product SKU: 370WJPDMJ00000001V1
$149.99 USD
The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. It's also suitable to grinde other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality. This item can shapen all the round saw blade, such as Skil saw. It adopts multi angle of swing, three dimensional slide structures to be in adaptation to the grinding of hard alloy saw blades with many specifications and purposes, which enables the grinding mill to maintain high accuracy and easy operation on any condition.
Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. MF-126 type grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
Method of operation:
First, loosing the fascia, then adjust the angle of grinding blade and fasten.
Second, adjusting of center axle.
  • Rotating the center axle to the grinding blade.
  • Pushing the center axle to the right.
  • Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
  • Rotating the rotation table to ensure the angle of grinding blade.
  • The cross angle between the grinding surface and work surface is about 5.
Third, adjusting of positioning assembly.
  • Adjusting the saw blade to the grinding position, rotating the positioning frame and fascia.
  • Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
Safety remarks:
  • Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
  • The machine should be set in a dry, clean, steady and parallel place.
  • Release the round plat and then adjust the saw blade angle.
  • Check all parts that need locks before operation.
  • After the machine runs well then you can start the work.
  • Take off the electricity after work finishing.
  • Inform the factory before you change the machines.https://buyyou.net/ASC365_canada/Admin/190/000/2.jpg
  • 1.base

    2.box body

    3.end cover

    4.rotatary base

    5.rotary table base

    6.rotary table

    7.slide base

    8.slide disc

    9.table

    10.guide nut base

    11.guide screw

    12.slide block

    13.frame

    14.board

    15.positioning board

    16.safe cover

    17.press board

    18.adjusting bolt

    19.upright post

    20.long bolt

    21.short bolt

    22.long handle

    23.short handle

    24.positioning pin

    25.mat cover

    26.diamond wheel

    27.cover

    28.motor

    29.rear stuck disc

    30.fore stuck disc

    31.big pin

    32.small pin

    33.hand wheel

    34.round handle

    35.turret handle

    36.earth foot

    37.adjusting bolt base

    38.fastening handle

    39.switch

    40.screw

    41.lirnit pin

    42.washe

    43.cover

     


     


     


     


     



  • The machine structure is strong and it can work on max diameter φ700mm.
  • The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
  • The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
  • This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
  • Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.
  • Steel chassis construction.
  • Grinding wheel angle control with large aluminum knob.
  • Will hold each blade head position by a position lock.
  • Extra 2 blade hole adapter.
  • X axis feed wheel, stable and very sharp grinding.
  • Rotary angle mark.
Specifications:
  • Power: 370 W
  • Voltage: 110V±15%, 50/60Hz
  • Running Speed: 3400 RPM
  • Adjusting Angle Of The Wheel: ±20°
  • Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
  • Working Diameter: 80 - 700 mm
  • Grinding Wheel Size: 4.92" / 125 mm
  • Bore Size Of Grinding Wheel: 1.26" / 32 mm
  • Sanding Wheel Dimensions: 4.92" x 0.39" x 1.26" x 0.2" x 0.08" / 125 x 10 x 32 x 5 x 2 mm
  • Net Weight: 66.14 lbs / 30 kg
  • Product Dimension: 30.3" x 16.93" x 11.81" / 770 x 430 x 300 mm
  • Package Dimension: 16.93" x 16.93" x 13.58" / 430 x 430 x 345 mm
The machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm. It's also suitable to grinde other material, such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc. Its fascia can support the teeth of saw blades and other parts in order to prevent jumping and improve grinding quality. This item can shapen all the round saw blade, such as Skil saw. It adopts multi angle of swing, three dimensional slide structures to be in adaptation to the grinding of hard alloy saw blades with many specifications and purposes, which enables the grinding mill to maintain high accuracy and easy operation on any condition.
Circular carbide saw blade are widely used for cutting aluminum, wood and plastic materials. MF-126 type grinding machine is used for sharpening many sizes and types circular carbide saw blade. If you change the sanding wheel it can also sharp other common saw blade. It is a necessary assistant machine for cutting aluminum, wood and plastic materials.
Method of operation:
First, loosing the fascia, then adjust the angle of grinding blade and fasten.
Second, adjusting of center axle.
  • Rotating the center axle to the grinding blade.
  • Pushing the center axle to the right.
  • Installing the saw blade ,rotate the wheel and decide the position of grinding surface saw teeth.
  • Rotating the rotation table to ensure the angle of grinding blade.
  • The cross angle between the grinding surface and work surface is about 5.
Third, adjusting of positioning assembly.
  • Adjusting the saw blade to the grinding position, rotating the positioning frame and fascia.
  • Adjusting positioning pin to the proper base of saw teeth and leave gap of grinding quantity, fasten the fixed screw.
Fourth, adjusting the center axle to the same gap of grinding quantity to the right.
Last, when all the parts are fastened, the saw blade supported with hand will be grinded.
Safety remarks:
  • Should match the standard voltage; We must strictly take a good ground, install leakage circuit breakers.
  • The machine should be set in a dry, clean, steady and parallel place.
  • Release the round plat and then adjust the saw blade angle.
  • Check all parts that need locks before operation.
  • After the machine runs well then you can start the work.
  • Take off the electricity after work finishing.
  • Inform the factory before you change the machines.https://buyyou.net/ASC365_canada/Admin/190/000/2.jpg
  • 1.base

    2.box body

    3.end cover

    4.rotatary base

    5.rotary table base

    6.rotary table

    7.slide base

    8.slide disc

    9.table

    10.guide nut base

    11.guide screw

    12.slide block

    13.frame

    14.board

    15.positioning board

    16.safe cover

    17.press board

    18.adjusting bolt

    19.upright post

    20.long bolt

    21.short bolt

    22.long handle

    23.short handle

    24.positioning pin

    25.mat cover

    26.diamond wheel

    27.cover

    28.motor

    29.rear stuck disc

    30.fore stuck disc

    31.big pin

    32.small pin

    33.hand wheel

    34.round handle

    35.turret handle

    36.earth foot

    37.adjusting bolt base

    38.fastening handle

    39.switch

    40.screw

    41.lirnit pin

    42.washe

    43.cover

     


     


     


     


     



  • The machine structure is strong and it can work on max diameter φ700mm.
  • The specially equipped motor has a very good running speed which can have a very good co-operation with the diamond sanding wheel.
  • The direction of the sharpening should be paralleled with the diamond sanding wheel, it is better for grinding the back teeth face.
  • This machine is designed for sharpening various kinds of carbide tipped saw blades from size 80mm to 700mm.
  • Also suitable to grind other material such as plastic, wood, aluminum alloy for different purpose like furniture manufacturing, decoration etc.
  • Steel chassis construction.
  • Grinding wheel angle control with large aluminum knob.
  • Will hold each blade head position by a position lock.
  • Extra 2 blade hole adapter.
  • X axis feed wheel, stable and very sharp grinding.
  • Rotary angle mark.
Specifications:
  • Power: 370 W
  • Voltage: 110V±15%, 50/60Hz
  • Running Speed: 3400 RPM
  • Adjusting Angle Of The Wheel: ±20°
  • Handle Turning Angle: 30 Degrees From Left And 45 Degrees From Right
  • Working Diameter: 80 - 700 mm
  • Grinding Wheel Size: 4.92" / 125 mm
  • Bore Size Of Grinding Wheel: 1.26" / 32 mm
  • Sanding Wheel Dimensions: 4.92" x 0.39" x 1.26" x 0.2" x 0.08" / 125 x 10 x 32 x 5 x 2 mm
  • Net Weight: 66.14 lbs / 30 kg
  • Product Dimension: 30.3" x 16.93" x 11.81" / 770 x 430 x 300 mm
  • Package Dimension: 16.93" x 16.93" x 13.58" / 430 x 430 x 345 mm

Shipping Policy

Shipping Fees

All the products are free shipping now, part of AK, HI, PW, MH, FM, VI, MP, AS, PR, GU States where remote place need addition shipping fees, no custom fees.

 

Note: Shipping time is influenced by the COVID-19, cargoes delivered time put off 3 days! Big cargoes( Please notice the size description or size photos that unilateral length more than 108'',  perimeter more than 165'' ) need 12 days delay.

Shipping Times

We adopt FedEx Ground、 UPS Ground、SAIA、RRTS、RLCARRIERS only ship orders within US, other country is not opened on this site, you can go to our other country site shop.

 

  • DELIVERY Days: 1-4 Business Days 
  • Processing Time: 3 Business Day
  • SHIP FROM CA & TX & KY & NJ WAREHOUSE

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

 

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 12-months Warranty and a 30-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 30 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please message Vevor Facebook or send a message to: support@vevor.com.

Customer Reviews

Based on 2 reviews
50%
(1)
50%
(1)
0%
(0)
0%
(0)
0%
(0)
A
A.a.B.
Works Great
R
R.A.S.
Worrth Every Penny