10 Quart Double Acting Hydraulic Pump Dump Trailer Control Kit Crane 12V
Rated 3.5/5 based on 11 customer reviews

10 Quart Double Acting Hydraulic Pump Dump Trailer Control Kit Crane 12V

Available: Out of Stock
Product SKU: 10LCZYYBSLSZY0001V0
Wishlist Compare
$249.99 USD
Successful pre-order.Thanks for contacting us!

The hydraulic power unit consists of high pressure gear pump, dc motor, multi-purpse integrated block, all kinds of  hydraulic valve, fuel tanks and other components co.LTD. Is a organnic combination, is a typical power up, power down the hydraulic circuit. The second relief valve system realize the control of the downward pressure, pressure compensated flow valve automatically to falling speed adjustment. This product is widely used in small dump truck, hydraulic winch. This power unit is suitable for control of a set of double-acting cylinder. Widely used in small dump truck, hydraulic winch, etc.

This unit comes standard in many dump trailers and It is a direct replacement for most power-up/gravity-down applications. Its high quality starter ensure long life and a fast starting each time. The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.


Directions for use:

  • According to hydraulic principle diagrams, with clean connecting hydraulic powe unit and oil cylinder tubing.
  • According to the motor and the power of the electromagnetic valve marked characteristics( ac, dc voltage is properly connected. )
  • Inching motor observe any abnormal phenomenon. In actuators,without load, start the electric, short run test, check whether all the parts run smooothly, determine and correct after loading step by step to normal operation.

Precautions:
  • The factory production of a hydraulic power unit when leaving the factory, the system pressure has been set.If  you want to change, the user according to the actual situation on their own through the knob to adjust the system pressure regualting valve, but no more than nominal pressure of the system.
  • Carefully check the motor and the electromagnetic valve connection. It is strictly prohibited to pick up.
  • In the installation and debugging for  the first  time, we must  keep the internal fuel tank oil level, after a work cycle, oil tank should be made up, but not be too full.
  • Electrical and electromagnetic valve connection should pay special attention to the supply characteristics( ac, dc voltage and has the same sign. Ac power motor shell must be reliable grounding, forbidden ground operation. The motor terminal box note waterprrof, moistureproof. Connection for the first time, inching motor check direction, from the motor back end, spin to counterclockwise. Absolutely forbidden motor reverse reverse rotation and oil-free idling.
  • When the gas tank hydraulic oil must be filtered, filtration precision is not lower than 25 microns.
  • Power unit can't filter the impurities inside the hydraulic cylinder. So the hydraulic cylinder internal must clean. Lest cause valve failure. Tubing must also be clean.

Maintenance:
  • We must keep the actuators, and pipeline cleaning, prevent dirt from entering the system.
  • We must keep the tank oil level, after a work cycle, proper fill oil.Such as pump suction air will cause the damage of pump and the damage of the seal.
  • 100 hours after the running of hydraulic oil for the first time to join, change the new oil.after a year( 1500 hours) to replace a new oil.
  • Hydraulic iol viscosity for 22 and 46 was commonly/s.
  • Working environment temperature high use hydraulic oil of high viscosity, low working environment with low viscosity hydraulic oil.
Features:
  • Perfect for Dump Trailers-Lift Gates!!
  • Perfect replacement pump for 12VDC controlled hydraulic systems
  • Designed for horizontal mounting
  • Standard duty 12VDC Motor
  • Fluid choice determined by operating environment/temperature
Specifications:
  • Material of tank: Plastic
  • Displacement of hydraulic pump: 0.825GPM( 1.1ML/R, Appliable to all double power unit for 4, 6, 8, 10 quart)
  • Pressure relief valve: 22MPA( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port)
  • Rated speed: 2850R/MIN
  • Motor power: 0.8--3KW( Appliable to all double power unit for 4, 6, 8, 10 quart)
  • Motor voltage: DC12V
  • Fuel tank: 10L
  • Double acting Power-Up/Power Down
  • 1500 PS Max Relief Setting on B port
  • 10 Quart Translucent Reservoir
  • SAE # 1 Port, Horizonal mount
  • Hand held pendant with about 15 foot( 4.5m)removal cord and start solenoid
Package Content:
  • 1×10 Quart Double Acting Hydraulic Pump
  • 1×English Manual
  • Several Related Accessories

The hydraulic power unit consists of high pressure gear pump, dc motor, multi-purpse integrated block, all kinds of  hydraulic valve, fuel tanks and other components co.LTD. Is a organnic combination, is a typical power up, power down the hydraulic circuit. The second relief valve system realize the control of the downward pressure, pressure compensated flow valve automatically to falling speed adjustment. This product is widely used in small dump truck, hydraulic winch. This power unit is suitable for control of a set of double-acting cylinder. Widely used in small dump truck, hydraulic winch, etc.

This unit comes standard in many dump trailers and It is a direct replacement for most power-up/gravity-down applications. Its high quality starter ensure long life and a fast starting each time. The motor is built to last, and the tank has been specifically designed to not crack & leak under harsh conditions.


Directions for use:

  • According to hydraulic principle diagrams, with clean connecting hydraulic powe unit and oil cylinder tubing.
  • According to the motor and the power of the electromagnetic valve marked characteristics( ac, dc voltage is properly connected. )
  • Inching motor observe any abnormal phenomenon. In actuators,without load, start the electric, short run test, check whether all the parts run smooothly, determine and correct after loading step by step to normal operation.

Precautions:
  • The factory production of a hydraulic power unit when leaving the factory, the system pressure has been set.If  you want to change, the user according to the actual situation on their own through the knob to adjust the system pressure regualting valve, but no more than nominal pressure of the system.
  • Carefully check the motor and the electromagnetic valve connection. It is strictly prohibited to pick up.
  • In the installation and debugging for  the first  time, we must  keep the internal fuel tank oil level, after a work cycle, oil tank should be made up, but not be too full.
  • Electrical and electromagnetic valve connection should pay special attention to the supply characteristics( ac, dc voltage and has the same sign. Ac power motor shell must be reliable grounding, forbidden ground operation. The motor terminal box note waterprrof, moistureproof. Connection for the first time, inching motor check direction, from the motor back end, spin to counterclockwise. Absolutely forbidden motor reverse reverse rotation and oil-free idling.
  • When the gas tank hydraulic oil must be filtered, filtration precision is not lower than 25 microns.
  • Power unit can't filter the impurities inside the hydraulic cylinder. So the hydraulic cylinder internal must clean. Lest cause valve failure. Tubing must also be clean.

Maintenance:
  • We must keep the actuators, and pipeline cleaning, prevent dirt from entering the system.
  • We must keep the tank oil level, after a work cycle, proper fill oil.Such as pump suction air will cause the damage of pump and the damage of the seal.
  • 100 hours after the running of hydraulic oil for the first time to join, change the new oil.after a year( 1500 hours) to replace a new oil.
  • Hydraulic iol viscosity for 22 and 46 was commonly/s.
  • Working environment temperature high use hydraulic oil of high viscosity, low working environment with low viscosity hydraulic oil.
Features:
  • Perfect for Dump Trailers-Lift Gates!!
  • Perfect replacement pump for 12VDC controlled hydraulic systems
  • Designed for horizontal mounting
  • Standard duty 12VDC Motor
  • Fluid choice determined by operating environment/temperature
Specifications:
  • Material of tank: Plastic
  • Displacement of hydraulic pump: 0.825GPM( 1.1ML/R, Appliable to all double power unit for 4, 6, 8, 10 quart)
  • Pressure relief valve: 22MPA( 3200 PSI Max. Relief Setting For Increased Lifting Power on A port)
  • Rated speed: 2850R/MIN
  • Motor power: 0.8--3KW( Appliable to all double power unit for 4, 6, 8, 10 quart)
  • Motor voltage: DC12V
  • Fuel tank: 10L
  • Double acting Power-Up/Power Down
  • 1500 PS Max Relief Setting on B port
  • 10 Quart Translucent Reservoir
  • SAE # 1 Port, Horizonal mount
  • Hand held pendant with about 15 foot( 4.5m)removal cord and start solenoid
Package Content:
  • 1×10 Quart Double Acting Hydraulic Pump
  • 1×English Manual
  • Several Related Accessories

Shipping Policy

Delivery Times

Package handling only takes 1 business day at our warehouse, so please make sure entering correct payment and shipping information before checking out.

We adopt FEDEX Ground ( UPS Ground ) to ship your orders.

FEDEX Ground ( UPS Ground ) : Shipping Time 3-7 business days.

 

 

About Modification

Once your payment is completed, please inform by phone or E-mail if any modification is needed before we dispatch your package.

The customer will be responsible for all extra fees caused by address alternation if contact is made after item has been dispatched.

International Purchase

Import duties, taxes and charges are not included in item price or shipping charges. The buyer should be responsible for these charges.

 

 

Return Policy

Every single product is backed by a 24-months Warranty and a 90-day return policy from the date of purchase. Special circumstances will be listed clearly in the listing.

If you need to return a product and get a refund, please contact us for free shipping label and ship it back to us.

 

Satisfying Guarantee for Every Purchase

Dear customer, please contact us if you are not satisfied with a product before applying for return or refund. A prompt exchange should be issued within 90 days of delivery in original packaging and with proof of purchase from Vevor.

 

Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's related to man-made damage. If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.

 

  1. All returns must be pre-approved. Unauthorized returns will not be accepted.
  2. Check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
  3. The same warranty is provided for replaced products as the returned ones.

 

If you are shipping the product

  1. Carefully pack the item(s) in original package.
  2. Stick the shipping label we offered on the outer
  3. Refund would be processed after the item is received by our warehouse staff, which is confirmed to be unopened and in good condition.
  4. For assistance on return, please call Vevor on (916) 273-9717or send a message to: service@vevor.com.

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)

Customer Reviews

No reviews yet
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)