VEVOR Storage Shelving Unit with Wheels, 4-Tier Adjustable, 700 lbs Capacity Manual

Discover the ultimate guide to optimizing your VEVOR Storage Shelving Unit with Wheels. Our comprehensive product manual download is designed to help you effortlessly set up, troubleshoot, and maximize the use of your 4-Tier Adjustable, 700 lbs Capacity, Heavy Duty Garage Shelves Metal Organizer Wire Rack.

This detailed manual provides step-by-step instructions, clear visuals, and expert tips to ensure your shelving unit is perfectly assembled and securely installed. Whether you’re organizing your kitchen, pantry, basement, or bathroom, this black, 47.2″ L x 17.7″ W x 74″ H shelving unit manual is your indispensable resource for achieving the best storage solutions. Simplify your life and keep your space tidy with our easy-to-follow guide.

Model: I6V0

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual.

The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

Important Safety Instructions

• Keep this manual for the safety warnings and precautions. The manual offers essential information on how to assemble, use, and maintain this product.
• The maximum load-bearing capacity is obtained by placing the weights equally on this product.
• Do not place all the weights on the same layer.
• The placement time under the maximum load bearing capacity shall not exceed 1 hour!
• Please keep any parts and/or packing material in the package away from infants/toddlers/small children while assembling this steel wire shelf.

ASSEMBLY PRECAUTIONS

1. Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous.
2. Please wear safety goggles and work gloves properly during assembly.
3. Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs, or medication.
4. Load bearing capacity and other product parameters are applied to the correctly and completely assembled product only.

USE PRECAUTIONS

1. This storage shelving unit is not a toy. Do not allow children to play with or get access to this item.
2. Follow the intended uses only. Do not sit or stand on the shelf.
3. Check carefully before use. Do not use a shelving unit with loose or damaged parts.
4. Use on flat, level, and hard surfaces only.
5. Do not exceed the listed load-bearing capacity. Tighten all the knobs securely before placing weights on. Be aware of the dynamic load-bearing capacity! Sudden load changes may temporarily cause excessive load, resulting in product failure.

SAVE THESE INSTRUCTIONS

Storage Shelving Unit Product Parameters

• Name: Steel Wire Shelf
• Model: I6V0
• W.: 16.0kg
• Package Size: 1225x468x175mm
• Total dynamic load limit: 175lbs
• Total static load limit: 450lbs (without wheels: 700lbs)
• Static load limit for each layer: 112.5 lbs ( without wheels: 175 lbs)

Attention:

For additional information regarding the parts listed below, please refer to the assembly diagram in this manual. Unwrap and separate all parts in a clear work area.

Storage Shelving Unit Assembly step

• Screw the caster(F)into the bottom of each lower poles (B) And snap the plastic clips(E) onto the grooves of each lower poles at the same position. Please ensure that the allow on the plastic clips should all point up.

• Please make sure that you have the wire shelf (A) the correct way up, hold the wire shelf on its side, and slide the top of the four poles through the bottom of the wire shelf at its corner until there is a snug fit, and then set the wire shelf upright.

• Snap plastic clips into the pole groove for the next wire shelf at your desired position. Slide down the shelf from top down onto the plastic clips.

• Screw upper poles(C) into the lower poles by screw connection which are already assembled onto the middle and upper poles.

Refer to step(3 to assemble the other wire shelves. After finishing assembly, push firmly down on every wire shelf at its corners with a rubber mallet (Not included) to ensure all the wire shelves are over the plastic clips.

• Hang the hook (D) over the edge of the shelf as the picture shows.

Made in China.