VEVOR Grease Gun, 10000 PSI Max. Working Pressure, 20 OZ / 600 CC Capacity Manual

Unlock the full potential of your VEVOR Grease Gun with our comprehensive product manual download. Whether you’re setting up, troubleshooting, or optimising your 10,000 PSI Max. Working Pressure, 20 OZ / 600 CC Capacity Heavy Duty Lever Action Grease Gun Kit, this manual is your ultimate guide. Designed with ease of use in mind, it provides step-by-step instructions, detailed diagrams, and valuable tips for efficient operation.

The Grease Gun manual covers everything from the initial setup to advanced maintenance, ensuring you get the best performance from your grease gun. With included components like an 18.5-inch flexible hose, 2 black flat couplers, and 1 straight metal pipe, our guide ensures you utilize every accessory to its fullest potential. Download now to enhance your user experience and keep your equipment running smoothly!

MODELS: LD-868, LD-867A, LD-867B, LD-2710

Warning

1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautions may result in serious personal

General Safety Rules

WARNING: Read and understand all instructions. Failure to follow all instructions listed below may result in serious injury.

Various dangers may occur if the hand lever grease gun is improperly handled during installation, commissioning and daily operation.

Risk of injury and damage to material property because of improper handling.

Hold the manual at the operating staff’s disposal for the unit’s use. Country-specific safety measures and accident prevention regulations must be observed. Only qualified and authorized persons are allowed to operate the grease gun.

Persons are qualified if they can assess assigned tasks and identify potentially hazardous situations due to their training, experience, instruction, and knowledge of the relevant standards. All persons charged with installation, operation, maintenance, and repair work must have read and understood these operating instructions.

The grease gun is designed exclusively for the delivery of grease lubricants. Any use beyond these parameters can lead to serious risks and is regarded as contrary to the intended purpose. The operator is responsible for damages other than the intended use.

CAUTION: Excess pressure can result in the bursting of the grease gun head and accessories!
Excess pressure at the greasing point can damage the grease nipple and the machine. Comply with the machine manufacturer‘s maintenance and service instructions.

Defective accessories can lead to personal injury and material damage. Grease hoses must not be kinked, twisted or stretched. During their use, accessories must be checked for wear, cracks, and other damage. Defective accessories should be replaced immediately. Please do not open the grease gun when it is under pressure!
Every time the grease gun head and barrel are to be separated, the push rod must be fully retracted and automatically locked utilizing the safety catch. Excess pressure can result in the bursting of grease gun heads and equipment. When using the grease gun, use suitable equipment, such as protective gloves and eye protection.
SAVE THESE INSTRUCTIONS

Models and Parameters

Structure Diagram

1. Head
2. Air Release Valve
3. Movable Handle
4. Fix Handle
5. Barrel
6. Safety Catch
7. Plunger Rod Handle
8. End Cap

1. Head
2. Air Release Valve
3. Handle
4. Safety Catch
5. Plunger Rod Handle
6. End Cap
7. Barrel

1. Head
2. Handle
3. Barrel
4. Plunger Rod Handle
5. Safety Catch

Components

Operating Instructions

Step 1: Hold the head of the grease gun and unscrew the barrel. Take LD-2710 as an example

Step 2: Pull back the plunger rod handle and fill the barrel with grease.

Grease filling options:
Cartridge Loading: Remove the plastic cap from the cartridge and insert the open end of the cartridge into the grease gun barrel until the rim of the pull-tab end meets the rim of the barrel.

Suction Fill: Insert the open end of the barrel about 2” into the grease container. Slowly pull the plunger rod handle to draw in grease into the empty barrel while pushing the barrel deeper into the grease until the plunger rod is completely extended. The outside surface may have a lot of grease stuck to it and should be wiped clean for safety.

Grease Gun Filling Device: Place the grease gun onto the filling valve of the grease gun filling unit and hold it in place with light counterpressure. Fill the grease gun by activating the filling device.

Step 3: Assemble the barrel back into the grease gun. Activate the safety catch and push the push rod back into the Barrel.

Step 4: Exhaust air by pressing the air release valve, loosening the gunhead and barrel (half a turn maximum), or repeatedly actuating the handle.

Step 5: Install the required fittings as shown below.(Fig1,Fig2,Fig 3)
Note: If necessary, wrap 3~5 loops of raw material tape around the joint.

Step 6: Press the coupler straight onto the grease fitting. Start operating the handle for grease filling.

Once the greasing is done, slightly tilt the coupler, twist, and pull back. The tilt and twist action will allow the coupler to be easily removed from the grease fitting.

Above are the LD-2710 operations. The operations of the LD-868, LD-867A, and LD-867B are the same as those of LD-2710.

Troubleshooting

Maintenance

Before each use, inspect the grease gun’s general condition. Check for cracked or damaged parts, misaligned or bent moving parts, leaking connections, and any other condition affecting the product’s safe operation. If a problem occurs, have it corrected before further use. Do not use damaged equipment.

After every use, dry with a soft cloth, remove all grease and debris from Grease Gun. Do not use solvents to clean or immerse in any liquids.

When storing, keep it in a clean, dry, and safe location away from children.

Only a qualified service technician should perform all maintenance, service, and repairs not discussed in the manual.