VEVOR Hitch Mounted Deer Hoist, 400 lbs Load Capacity, Hitch Game Hoist, Carbon Steel Manual

Enhance your hunting experience with the VEVOR Hitch Mounted Deer Hoist, engineered for reliable strength and effortless operation. Designed to support a load capacity of up to 400 lbs, this hitch game hoist is perfect for easily lifting and transporting your game. The hitch-mounted design ensures stability and convenience, allowing you to attach it directly to your truck’s 2-inch hitch receiver.

Our comprehensive product manual provides step-by-step instructions for setup, troubleshooting, and optimization, ensuring you get the most out of your truck hitch deer hoist with winch lift set. Featuring adjustable height and a 360-degree swivel, this carbon steel hoist offers unparalleled flexibility and durability. Whether you’re a seasoned hunter or a beginner, our user-friendly guide will help you maximize your equipment’s performance, making game lifting and processing more efficient.

Download the VEVOR Hitch Mounted Deer Hoist manual today, and take the guesswork out of your next hunting trip. With detailed illustrations and clear, concise instructions, you’ll be ready to set up your hitch game hoist quickly. Trust VEVOR for quality, durability, and ease of use.

Warning

1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

General Safety Rules

1. Never overload.
2. This hitch-mounted deer hoist is designed for pulling, not for lifting!
3. Never put your hand or anything else near the gear, rim, or rolling cable. Always wear gloves when using the winch.
4. Never try to repair or disassemble the winch when it is damaged. Instead, ask a machinist or specialist for help.
5. Do not use the product when you are tired, while under the influence of alcohol, prescription medicine, or drugs.
6. The safety precautions and instructions in this manual do not cover in detail all the conditions and situations that may arise.
7. The operator and/or user must use common sense and caution when operating the product, especially regarding matters not referred to in the above.
8. Using accessories other than those recommended by the manufacturer or in the instruction manual may result in injury or damage.

Operation

1. Keep the work area clean and free. Cluttered areas invite accidents.

2. Observe work area environment conditions

• Do not expose the product to rain.
• Do not use in damp locations.
• Ensure the work area environment is well lit (sunlight or artificial lighting).

3. Dress properly

• Do not wear loose clothing or jewelry that could be caught in moving parts.
• You’ll need rubber gloves, non-skid footwear, and a cap to contain long hair.

4. Do not use the product for purposes other than those it is intended for. It will do a better and safer job if used for its rated load.

The load is maximum when the product’s lifting rod is at its lowest; it decreases as the lifting rod’s height increases.

6. Keep a safe distance and keep children away

• Keep yourself and others safe from the work area, the product, and the steel cable when it pulls under load.
• Keep bystanders (esp. children) and animals away from the work area.
• Keep the product away from children or their environment. Never allow children to operate the product. Supervise children to ensure that they do not play with it.

7. Do not damage the steel cable

• Never move the product by dragging it by the cable.
• Keep the cable away from heat and sharp edges.
• Do not step on or roll over the product or steel cable.
• During operation, do not step over the product or the steel cable.

8. Safety at work

• Use proper protective equipment according to the work environment.
• Never pull loads greater than the maximal capacity of the product.

Save These Instructions

Models and Parameters

Structure Diagram

GZB88055-CD400LBS

1. Prey Hook
2. Stop Fork
3. Lifting Rod
4. Hand winch
5. Upright Rod
6. Trailer Bar
7. Bar Connection Rod

GZB88055-CD400LBS+ZCT
GZB88056-CD500LBS+ZCT

1. Prey Hook
2. Stop Fork
3. Lifting Rod
4. Hand winch
5. Upright Rod
6. Trailer Bar
7. Bar Connection Rod
8. Supporting Leg

Components

Assembly

Installation Preparation

1. Two or more people are required to move and assemble the product.
2. Please prepare a carpet or mat to protect your floor. You need to spread out all the accessories.
3. Please prepare gloves to avoid being scratched by sharp parts that may occur during installation.
4. Please open all the boxes to ensure the accessories are complete and in good condition.
5. If you need to use power tools to install this product, please set the speed to low speed in advance.

Step 1: Insert C into D, align holes, lock with J+P.

Note: The hole position can be adjusted according to the required height.

Step 2: Install manual winch (F), align 2 mounting holes, and lock with K+O.

Step 3: Install the stop fork (B). First, insert the steel cable into the pulley groove and then lock with L+N.

Step 4: Install the trailer bar. Insert H into D, Match Q, and Product GZB88055-CD400LBS is assembled; Then connect it to the car, and you can use it. (Note: You can also connect to your car with the help of (E) )

For GZB88055-CD400LBS+ZCT and GZB88056-CD500LBS+ZCT, you’ll require a support leg, as shown below.

Insert I into H, align holes, and lock with M+P. (Note: Adjust the hole position according to your needs.)

Connect to the car as in Step 4.

Hand Winch Operation:

1. Hook
2. Steel Cable
3. Rim
4. Crank
5. Axis Bolt
6. Base
7. Ratchet Switch

Install 4 on 5 and lock securely,

The forward and reverse steering is controlled by 7.

Turn the handle 4 to rewind or release the steel cable.

The ratchet switch should always be fully engaged.

Maintenance

1. Lubricate the steel cable and hook regularly with a slight grease.
2. Grease the gears and bearings every 6 months. Use any good-quality waterproof grease.
3. Inspect all parts, steel cable, and accessories periodically, and replace them if damaged or worn.
4. Have damaged parts replaced by an authorized service center.
5. Check the nuts periodically and tighten them if they are loose.
6. Regularly check the steel cable for signs of tear and wear. If it is damaged, replace it at an authorised service centre.
7. Keep the product properly maintained and clean for a better and safer performance.
8. Inspect all moving parts, mounting bolts, and nuts before use. Tighten if necessary.
9. Store the product in a dry location. Always lock it up and keep it out of the reach of children.