VEVOR Come Along Winch, 2 Ton (4,409 lbs) Pulling Capacity, 12 ft Steel Cable, 2 Hooks Manual

Unlock the full potential of your VEVOR Come Along Winch with our comprehensive product manual. Designed for users of the 2-ton (4,409 lbs) Pulling Capacity winch, this manual is your go-to resource for setup, troubleshooting, and optimizing your heavy-duty ratchet power puller tool.

The manual, with detailed instructions on the 12 ft steel cable and dual gear mechanism, ensures you make the most of your winch, whether for vehicle rescue or other automotive hoist applications. Our straightforward guide covers every aspect of operation, maintenance, and safety, making it easy to handle any situation confidently.

Download the VEVOR Come Along Winch manual now and ensure you’re always ready for any pulling or lifting task.

MODEL: KH2000B

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret the user manual clearly.

The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

SAFETY INSTRUCTIONS

1. Do not use the ratchet power puller when the vehicle is in the “P” (parking brake) position; this may damage the vehicle’s transmission.
2. Before use, straighten the cable and do not twist it to avoid breaking the rope.
3. When using the ratchet power puller, keep hands, clothing, hair, and jewelry away from the cable/gear.
4. Do not wrap the cable around the load or hook the load directly onto the cable. Doing so could damage the load and twist or damage the cable.
5. Do not use the ratchet power puller if the cable is frayed, twisted, or damaged.
6. Do not allow anyone to stand near the cable/in the cablepullingline/behind the hand puller while it is on.
7. Never pass over the hand puller or steel cable during use.
8. Against the parameter table, do not overload fracture tension!
9. Never use other levers or tubes to put force on the tightening handle.
10. It is prohibited to subject the wire tightener to sudden shock loading energy.
11. Don’t let the wire rope hang over, come close to, or go around sharp corners, as this can cause it to be cut off.
12. The product is solely for pulling purposes on loads or to pull two cables together within the product’s technical specs.
13. The product is not intended for hauling floating vessels, nor not forprofessional and/or industrial applications.
14. Do not use the ratchet power puller for hoisting or lifting operations. For this type of application, hoists must comply with particular safety requirements.
15. The ratchet power puller in this operation manual is not intended to transport persons.

MODEL AND PARAMETERS

STRUCTURE DIAGRAM

1. Handle
2. Pawl Spring Switch
3. Drive Pawl
4. Ratchet
5. StopPawl Trigger
6. Anchor Hook
7. Load Hook
8. Wire Rope
9. Guard

COMPONENTS

COME ALONG WINCH OPERATION

CHECK THE HAND PULLER CAREFULLY BEFORE USING IT!

Suggestion: Get acquainted with how the handpuller operates by conducting a few test runs before you use it.

Note: It may be difficult to pull out the rope if it is fully packed. Please reserve an appropriate length outside!

• Switch the pawl spring to the upper unlock position to release the pawl.

• Flip the handle to the opposite side, hold the trigger simultaneously, and the wire rope can be pulled out.

• Reset the handle and switch the pawl spring back to its original position to lock the pawl.

• The wire rope retracts when you push and pull the handle back and forth.

Note: If you stack the wire rope on one side, you may use your finger to guide the rope while retracting.

COME ALONG WINCH MAINTENANCE

1. Lubricate the wire rope regularly and check for wear and broken wire.
2. Be sure to wipe the product with a dry cloth after use in harsh environments, such as bad weather or by the sea.
3. Keep the come-along winch away from fire.