VEVOR Hydraulic Lift Table Cart, 500lbs Capacity 28.5″ Lifting Height Black Manual

Unlock the full potential of your VEVOR Hydraulic Lift Table Cart with our comprehensive product manual download. Designed to support 500 lbs and achieve a lifting height of 28.5″, this manual single scissor lift table offers unparalleled ease of use and functionality.

Our detailed manual covers every setup, operation, and optimization aspect, ensuring you get the most out of your hydraulic scissor cart. Our guide makes material handling smoother and more efficient with step-by-step instructions and troubleshooting tips.

The manual also highlights the benefits of the cart’s four wheels and non-slip pad, which provide stability and ease of movement. Perfect for both novice and experienced users, our user-friendly manual is your go-to resource for maximizing the performance and longevity of your VEVOR Hydraulic Lift Table Cart.

MODEL: TF15/TF23, TF50, TFD15, TFD35, TFD80

Note: Owner and Operator MUST read and understand these operating instructions before using this table truck.

Hydraulic Lift Table Cart Specifications

Remark: Specifications will be changed without prior notice.

Save This Manual

1. Read and understand the instruction manual. Failure to comply with the instructions and warnings in this manual may result in personal injury or property damage.
2. Do not load the hydraulic table cart beyond its rated capacity.
3. Do not allow people to sit or ride on it.
4. Secure the load before raising or lowering the hydraulic table cart.
5. Do not transport loads with a hydraulic table cart in a raised position.
6. Use only on smooth surfaces.
7. Keep hands and feet clear when raising or lowering the lift.
8. Open release valve knob slowly to allow load to descendinacontrolled manner.
9. Be sure to wear ANSI-approved safety gloves when using tools or equipment.
10. Release the load before service or maintenance.
11. Avoid off-center loads. Do not operate if the workpiece tilts or binds during compression.
12. STOP and release compression if you suspect imminent structural failure. If safe, inspect thoroughly and reposition before proceeding.
13. Keep bystanders out of the work area
14. This product is not a toy. Keep it out of reach of children.

The Warnings, Cautions, and Instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. The operator must understand that common sense and caution are factors that cannot be built into this product, but must be supplied by the operator.

Assembly

Refer to the Parts Diagram and Parts List in this booklet.

1. Attach the handle (9) to the frame (10) with two flat washers (20) and two bolts (19).
2. Attach the foot lever (50) to the lift lever (47) with bolt (49) and lock washer (48).
3. For TF50, the table and the best part are packed separately. Attach the table (1) to the link assembly (2) with two link shafts (3a) and two C-clips (4).

Hydraulic Lift Table Cart Operation

1. Close the valve knob by unclenching the control handleuntil it stops.
2. The table is raised by activating the foot pedal.
3. To lower the table, slowly draw the control handle.
4. Before loading and while stationary, lock the caster brake.

Hydraulic Lift Table Cart Maintenance

1. Lubricate each friction point monthly with a good quality grease.
2. Check the free movement and wear of wheels. Replace if needed.
3. Check the caster brake function. It should lock firmly and release completely.
4. Check for oil leakage from the hydraulic cylinder. The hydraulic cylinder is not user-serviceable.

Please Read the Following Carefully

The manufacturer and/or distributor has provided the parts diagram in this manual as a reference tool only. Neither the manufacturer nor the distributor makes any representation or warranty to the buyer that he or she is qualified to make any repairs to the product or that he or she is competent to replace any parts of the product.

The manufacturer and/or distributor expressly states that all repairs and parts replacement should be undertaken by certified and licensed technicians, not the buyer. The buyer assumes all risk and liability arising from his or her repairs to the original product, replacement parts, or installation of replacement parts.

Hydraulic Table Cart Troubleshooting

(NOTE: DO NOT ATTEMPT TO REPAIR THE TABLE TRUCK UNLESS YOU ARE TRAINED AND AUTHORIZED TO DO SO.)

Hydraulic Lift Table Parts