VEVOR Adjustable Workbench, 72″ L X 25″ W Garage Worktable Manual

Unlock the full potential of your VEVOR Adjustable Workbench, 72″ L X 25″ W Garage Worktable with Universal Wheels, with our comprehensive product manual download. Designed for both novices and seasoned DIY enthusiasts, this manual provides clear, step-by-step instructions to help you effortlessly set up, troubleshoot, and optimize your workbench.

Whether you’re adjusting the height from 28″ to 39.5″, utilizing the 3,000 lb load capacity, or maximizing power outlets, the hardwood top, storage, or foot pads, our guide ensures you get the most out of your workbench.

Benefit from detailed diagrams, safety tips, and maintenance advice to keep your worktable in peak condition. Download now for a seamless setup and a superior work experience in your garage, office, or home.

Model: SHFGM4824/6022/7225

Safe Instructions

Please read this user manual carefully!

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities only apply to a properly and completely assembled product.
7. Assemble on a flat, level, hard, and smooth surface capable of safely supporting a fully loaded workbench.

Use Precautions

1. Do not attach or mount this adjustable workbench to a vehicle. This may cause personal injury or product damage.
2. Do not stand on or step on this product. You may fall, which may cause personal injury.
3. Keep the product on level surfaces. The product may become unstable and tip if stored or moved on an unlevel surface, which may cause personal injury or product damage.
4. Lock the drawers before moving this product. The drawers could come open, making the product unstable and tipping, which may cause personal or product damage.
5. Keep children and bystanders away while loading, unloading, and moving the product.
6. Please do not lift the product directly with a forklift or tow it with mechanical devices.
7. Do not exceed the maximum load capacity of each drawer or tray, including contents.
8. Do not alter this product in any manner.
9. The box contains some small components; please place them properly before installation to keep them away from kids and ensure safety.
10. Before installing the socket, the desktop should be cleaned to ensure no stains are on it. Attention should also be paid to not bringing water into the socket to avoid safety problems during subsequent use.

CAUTION: Carefully read instructions and procedures for safe operations.

SAVE THESE INSTRUCTIONS

VEVOR Adjustable Workbench Model and Parameters

Structure Diagram

1. Telescopic Leg
2. Foundation
3. Power Strip
4. Hanging Plate (Side)
5. Desktop

Components

Adjustable Workbench Installation

Installation Preparation:

1. Two or more people are needed to move and assemble the workbench.
2. Please prepare a carpet or mat to protect your floor; you must spread all the accessories.
3. Please prepare gloves to avoid being scratched by sharp parts that may occur during installation.
4. Please open all the boxes to ensure the accessories are complete and in good condition.
5. If you need to use power tools to install this product, please set the speed to low speed in advance.
6. When installing, please align all the holes and do not tighten all the screws first; otherwise, it may make the installation difficult.

Installation

• Install the desktop and supports.

• Install front and rear baffles.

• Install telescopic legs.

• Install the power strip.

• Reconfirm that all parts are locked and the installation is complete.

Adjustable Workbench Maintenance

1. Please try to avoid putting wet items on the desktop.
2. Dust off regularly with a clean rag, and arrange items neatly on the desktop.
3. Don’t let it sit in the sun for too long.
4. Check the table regularly to prevent screws from loosening and falling off.

Made in China