VEVOR 30 Gallon Fuel Caddy, 23.5 L/min, 180W Portable Storage Tank Container Manual

Discover the ultimate fuel storage and transfer solution with the VEVOR 30-Gallon Fuel Caddy. This comprehensive product manual download provides everything you need to maximise the use of your 180W portable storage tank container.

Designed for ease of use, this manual offers step-by-step instructions for setup, optimization, and troubleshooting, ensuring you can efficiently manage diesel, lubricating oil, machine oil, and more. Whether you’re using it for cars, mowers, boats, or motorcycles, the VEVOR Fuel Caddy manual covers all aspects to enhance your user experience and prolong the life of your equipment.

Download our detailed manual today, and you’ll gain access to invaluable tips and best practices for getting the most out of your fuel transfer storage tank.

MODEL: JGC-30E

Warning

1. Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
2. Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

General Safety Rules

• When using this product, basic precautions should always be followed, including the following;
• This product is not intended for use by persons, including children, with reduced physical, sensory, or mental capabilities or lack of experience and knowledge unless they have been given supervision or instruction concerning the use of the product by a person responsible for their safety.
• Do not use this product other than intended use.
• Wear proper protective equipment when installing or using this product.
• Ensure all fittings and threaded connections are tightened and leak-free before operating.

A Danger!

• Fuels are extremely flammable. Keep away from heat sparks and open flames.
• Do not use electronics or mobile communications devicessuchasmobile phones, when pumping flammable liquids.
• Attach the ground wire and bond the containers being pumped from and into. Ground all containers to a known ground source to dissipate static electricity before pumping liquids.
• Fuel vapors can explode. Harmful or fatal if swallowed. Avoid breathing in fuel vapours.
• Do not smoke near or while using the fuel caddy.
• This product is intended for fuel transfer only and is not designed to transport fuel in any vehicle or trailer.
• Do not modify this product.

A WARNING! CAUTION! ATTENTION!

• Do not use this product for prolonged fuel storage.
• Use the caddy for one fuel type only to avoid possible damage.
• Monitor flow rate and fill level to prevent overflows and spills.
• Always empty the pump and hose after using the caddy. Lift the hose and turn the handle opposite to empty all remaining liquid back into the caddy.
• When filling the caddy through the fill tube, monitor closely to prevent overflows or spills.
• This product is unsuitable for placing in a yacht, off-road vehicle, or other violent vibrations.

Never use the fuel caddy near open flames or heat sources.

SAVE THESE INSTRUCTIONS

Fuel Caddy Model and Parameters

Structure Diagram

1. Handle
2. Hose
3. Pump
4. Oil Dip Rod
5. Fuel Tank Cap
6. Fuel Tank
7. Swivel Caster (Front)
8. Fixed Wheel (Back)

Fuel Caddy Components

VEVOR Fuel Caddy Assembly

Install the fixed wheels. Screw the wheel shafts (12) into the fuel tank, then put the fixed wheels (3) into the wheel shafts and lock them with gaskets and nuts.(16+17)

Unscrew the nuts first, then install the swivel caster Films (7) and the swivel casters(5). Screw the nuts.

Screw the lock nut (10) into the oil outlet. Wrap at least 5 circles of raw material around the outlet. Then, screw the pump (6) on the outlet and adjust the orientation. Last, lock the pump with the locknut. Remove the pump’s screw and install the grounding wire (9) on it with this screw.

Insert the handle (3) into the tank at the appropriate position, as shown.

Wrap at least 5 circles of raw material around the hose fitting (15) and screw it to the pump outlet. Then, attach the hose to the hose fitting and lock it with a hose clamp (11).

The product is assembled and ready for use.

Fuel Caddy Operation

Refueling operation

• Please choose the appropriate oil filling; do not fill with water, gasoline, or other corrosive solvents.
• Do not leave the oil pump empty for more than 1 minute to avoid damage to the oil pump.
• When filling oil, please do a good job of grounding; connect the clip of grounding wire to a good earthing terminal and ensure user safety.
• Open the tank cap, and put the oil into the caddy through the oil inlet. For the first time, please eliminate air while taking the measures.
• Please do not add the oil beyond the capacity. When the red pointer reaches the highest limit, do not add oil anymore.
• After filling the tank, tighten the cap and keep the tank upright.

Pumping operation

• Before pumping oil, ground the fuel tank’s grounding wire.
• Ensure that the power supply is 12V DC; connect the pump’s red line to the positive pole and the black line to the negative pole.
• Turn on the pump’s switch to pump oil.

Fuel Caddy Maintenance

1. Please clean the measure and filter regularly.
2. Operate the machine in a horizontal position; do not incline.
3. Keep away from fire.
4. For different types of oil, it is recommended to clean the tank before storing another type of oil.
5. If this product is not used for a long time, cleaning and storing it in a cool and dry environment is recommended.

Made in China