VEVOR Sheet Metal Nibbler 380W, Electric Metal Nibbler 1800RPM High Speed Rotor 0.07in/1.8mm Manual

Unlock the full potential of your VEVOR Sheet Metal Nibbler 380W with our comprehensive product manual download. This detailed guide is designed to help you seamlessly set up, operate, and maintain your electric metal nibbler, ensuring optimal performance and longevity.

With clear instructions and helpful troubleshooting tips, our manual makes it easy to handle cutting tasks on stainless steel, aluminium, and plastic with the high-speed rotor running at 1800 rpm.

Whether you’re a professional or a DIY enthusiast, this manual will streamline your projects and enhance your user experience. Enjoy the benefits of replaced blades and a convenient storage case, all explained in our user-friendly, step-by-step guide. Download now to get started!

Electric Metal Cutting Machines

MODEL NO: YT-200E 1818

Sheet Metal Nibbler Safety Instructions

PLEASE READ & UNDERSTAND THESE INSTRUCTIONS!
STORE THESE INSTRUCTIONS IN A SAFE PLACE!

General Safety Rules

WARNING.

FAILURE TO FOLLOW ALL INSTRUCTIONS LISTED BELOW & OVERLEAF MAY RESULT IN ELECTRIC SHOCK, FIRE &/OR SERIOUS INJURY.

THE TERM “POWER TOOL” IN ALL WARNINGS LISTED HEREAFTER REFERS TO YOUR MAINS OPERATED (CORDED) POWER TOOL OR BATTERY-OPERATED (CORDLESS) POWER TOOL.

TOOLEX INDUSTRIAL 596699 1.8 MM METAL CUTTING NIBBLER.

Work area

• Keep the work area clean and well-lit. Cluttered and dark areas invite accidents.
• Do not operate power tools in explosive atmospheres, such as those containing flammable liquids, gases, or dust. Power tools create sparks, which may ignite the dust or fumes.
• Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

Electrical safety

• Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce the risk of electric shock.
• Avoid body contact with earthed or grounded surfaces such as pipes, radiators, ranges, and refrigerators. If your body is earthed or grounded, you are at an increased risk of electric shock.
• Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock.
• Do not abuse the cord. Never use the cord for carrying, pulling, or unplugging the power tool. Keep the cord away from heat, oil, sharp edges, or moving parts. Damaged or entangled cords increase the risk of electric shock.
• When operating a power tool outdoors, use an extension cord suitable for outdoor use. This reduces the risk of electric shock.

Personal safety

• Stay alert, watch what you are doing, and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol, or medication. A moment of inattention while operating power tools may result in serious personal injury.
• Use safety equipment. Always wear eye protection. Safety equipment such as a dust mask, non-skid safety shoes, a hard hat, or hearing protection, used under appropriate conditions, will reduce personal injuries.
• To avoid accidental starting, ensure the switch is in the off position before plugging in. Carrying power tools with your finger on the switch or plugging in power tools that have the switch on invites accidents.
• Remove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury.
• Do not overreach. Keep proper footing and balance at all times. This enables better control of the power tool in unexpected situations.
• Dress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewellery, or long hair can be caught in moving parts.
• If devices are provided for connecting dust extraction and collection facilities, ensure they are connected and properly used. The use of these devices can reduce dust-related hazards.
• Power tool use and care
• Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed.
• Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired.
• Disconnect the plug from the power source before making adjustments, changing accessories, or storing power tools. This preventive safety measure reduces the risk of accidentally starting the power tool.
• Store idle power tools out of the reach of children. Do not allow persons unfamiliar with the power tool or these instructions to operate the power tool. Power tools are dangerous in the hands of untrained users.
• Maintain power tools. Check for misalignment or binding of moving parts, breakage of parts, and any other condition that may affect their operation. If damaged, have the power tool repaired before use. Poorly maintained power tools cause many accidents.
• Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting edges are less likely to bind and are easier to control.
• Use the power tool, accessories, tool bits, etc., in accordance with these instructions and in the manner intended for the particular type of power tool, taking into account the working conditions and the work to be performed. Using the power tool for operations other than the intended ones could result in a hazardous situation.

Sheet Metal Nibbler Service

a) Have your power tool serviced by a qualified repair person using only identical replacement parts. This will ensure the tool’s safety.

Additional Information.

a) Wear ear protectors. Exposure to noise can cause hearing loss.
b) Always wear eye protection.
c) If the supply cord is damaged, it must be replaced by an authorized service agent in order to avoid a hazard.
d) It is recommended that a residual current device of 30mA sensitivity or less be used in the power supply system to which this tool is to be plugged in.

Instructions

Electric Metal Cutting Nibbler

Thanks for purchasing our heavy-duty sheet metal nibbler. This machine is for cutting most forms of metal sheeting, nonferrous metal sheet & other similar sheeting with a thickness of 1.8mm or less. Please read & understand these instructions & keep in a safe place.

WARNING: Please read these instructions before you use this tool!

• It’s possible you can be injured if you don’t read & understand all instructions below.
• Remove the plug from the power supply before any maintenance is carried out.
• Check the voltage on the name plate is the same as your power supply.
• Make sure the switch is off before connecting to mains power.
• Do not exceed the maximum cut capacity of this tool.
• Only use this tool in applications as described in the instructions.
• Make sure the unit is at full speed before you start cutting the material.
• It is recommended that some cut lubrication be used on some materials.
• Children should not use this machine.

Note:

1. Please make sure that all screws are tight on the machine before you operate the nibbler and that the auxiliary handle is always fitted to it.
2. Children are advised not to use this machine due to the heavy weight & to avoid any possible accidents.
3. The material being cut should be clamped to a worktable. Push the switch lever forward, and the nibbler blade will start to run. You can then start to cut the material. For the best cutting performance, make sure the nibbler is kept at a level angle to the workpiece.
4. Make sure the nibbler only rests on the cutting sheet when you are cutting the material. Otherwise, the blade and holder may be damaged.

Sheet Metal Nibbler Features

• Unique design & extremely durable machine.
• Excellent cutting speed & performance.
• Cuts without sparking & leaves a burr free cut edge.
• The machines can be spun at full 360 degrees while cutting the material.
• Accomplishes a wide range of cutting shapes.
• Cutting Blade & Guide block are easily replaced to offer the best cutting performance.

Cutting Capacity:

• Sheet Steel & Iron Plate: 0.5mm〜1.8mm
• Stainless Steel: ≤1.2mm
• Other materials, such as aluminium, copper, zincalume: 2mm

Specifications:

• Machine Length: 280mm
• Cutter Head Height: 155mm
• Machine’s weight: 1.8kg
• Motor Speed: 30,000rpm

Content:

1. Electric Metal Cutting Machines. 1pc
2. Screw Sleeve Wrench 1pc
3. Instruction Manual 1pc

Replacement Instructions

(Refer to pictures 2 and 3):

Replacement of the down mould:

 Loosen two inner hexagonal screws (4) slowly with a hex Wrench (4mm) and replace with a repaired down mould or a new down mould (6), then tighten the two screw (4).

Replacement of cutting blade:

Loosen two inner hexagonal screws (4) slowly with a hex Wrench (4mm) and lower down mould (6), then release the screw sleeve with the screw sleeve wrench and pull the blade part (3), release old cutting blade (2) on and replace with repaired cutting blade or new cutting blade, then reinstall to tighten any screws.

 

VEVOR Sheet Metal Nibbler 380W, Electric Metal Nibbler 1800RPM High Speed Rotor 0.07in/1.8mm Manual