VEVOR Wall Mount Range Hood (30 inch) Manual

Download our comprehensive product manual to unlock the full potential of your kitchen with the VEVOR Wall-Mount Range Hood, Ductless Chimney-Style Kitchen Stove Vent, Stainless Steel Permanent Filter with 3-speed Exhaust Fan, 2 Baffle Filters, LED Lights, and Touch Control Panel (30 inch). This extensively detailed guide ensures you get the most out of your range hood, providing step-by-step instructions for setup, use, and maintenance.

Whether you’re installing the range hood for the first time or troubleshooting a specific issue, our manual covers it all with user-friendly language and clear illustrations. Thanks to our detailed explanations of the 3-speed exhaust fan, touch control panel operations, and maintenance of the stainless steel permanent filter and baffle filters, you can easily optimise your kitchen’s ventilation system.

Enhance your cooking environment with the VEVOR Wall Mount Range Hood and rely on our manual for a seamless experience.

VEVOR Wall Mount Range Hood User Manual

MODEL: TD0975G-CC-I1

Thank you for choosing this Range Hood. This instruction manual provides all the instructions for installing, using, and maintaining the appliance. Please read this instruction manual carefully before installation and use to ensure the unit is operated correctly and safely.

Safety Instructions

• Never let the children operate the machine.
• The range hood is for home use only and is unsuitable for barbecues, roast shops, or other commercial purposes.
• Clean the range hood after the specified time.
  (suggestion: every 2 months) According to the instruction manual, keep the unit away from danger of burning. There is a fire risk if cleaning is not carried out per the instructions.
• Please keep the kitchen well-ventilated before connecting this appliance; please check that the power supply cord is undamaged. A damaged supply cord must be replaced by qualified service personnel only.
• Regulations concerning the discharge of air have to be fulfilled.
• This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children shall not play with the appliance. Children shall not make cleaning and user maintenance without supervision.
• If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
• The room shall be adequately ventilated when the range hood is used simultaneously with appliances burning gas or other fuels. The range hood is only intended to be installed over a hob with no more than four hob elements. The air must not be discharged into a flue used for exhausting fumes from appliances burning gas or other fuels.
• Range hoods and other cooking fume extractors may adversely affect the safe operation of appliances burning gas or other fuels (including those in different rooms) due to backflow of combustion gases.

  These gases can potentially result in carbon monoxide poisoning.

  After installing a range hood or other cooking fume extractor, a professional should test the operation of flued gas appliances to ensure that combustion gases do not back up.

CAUTION

Accessible parts may become hot when used with a cooking appliance.

Electrical Shock Hazard

Only plug this unit into a properly earthed outlet.

If you have doubts, seek advice from a suitably qualified engineer.

Product Parameters

Hardware Included

Tools Required

Installation Instructions

Prepare for Installation

Warning: Failure to install the screws or fixing device in accordance with these instructions may result in electrical hazards.

• If you have an outlet to the outside, your Range Hood can be connected as in the above picture using a pipe (with an interior diameter of 150mm). If you don’t have an outlet to the outside, you can use a carbon filter to go with recirculation mode.
• Before installation, turn the unit off and unplug it from the outlet.
• The range hood should be placed 650-750mm above the cooktop for the best effect.

Note: Do not flame under the Range Hood

Air Outlets Installation Method

Installation method for a 150mm diameter pipe

Insert the one-way valve as shown in the pic and fix the pipe.

Attention

The bump of the one-way value must be upward.

The pipe near the air outlet needs to be fully extended.

Wall Mounting Model Installation

• Before installation, prepare a pencil, electric drill, plastic wall anchors, and level. The recommended installation height is 700 mm, and the minimum is 650 mm.

• Drill 3 × 8mm holes to accommodate the bracket. Screw and tighten the hook onto the wall with the screws & plastic wall anchors provided.

• Lift the range hood and hang it on the wall hook.

• Need to drill 2×8mm extra holes & fix screws & plastic wall anchors before installation.

• Mark down the position and drill 2 holes for each chimney bracket, and tighten the bracket with screws.
  Note: The longer bracket is the upper chimney bracket

• Fix the one-way valve to the range hood’s air outlet, and then attach the pipe to the air outlet as shown in the picture.

• Put the upper chimney into the lower chimney. Then, pull out the upper chimney upwards. Adjust to reach the required height.

• There are 2 methods for installing the chimney cover. Please check the attached pic for reference.

• After drilling the 2 holes and fixing the bracket, hang the chimney cover by matching the two side locks. (Pic 1)
• After drilling the 2 holes and fixing the bracket, install the chimney cover by locking it with the two screws in both side holes. (Pic 2)

Before Use

Note: Please remove the white/blue protective film on the range hood, chimney covers, and baffle filters.

Operation

Maintenance

Before cleaning, switch the unit off and pull out the plug.

Regular Cleaning

Use a soft cloth moistened with hand-warm, mildly soapy water or household cleaning detergent. Never use metal pads, chemical, abrasive material or stiff brush to clean the unit.

LED Light replacement

1. Switch the unit off and unplug the appliance.
2. Remove and disconnect the LED light cable from the range hood.
3. Replace with the same type and rate LED light. Connect the LED light cable to the range hood.

CAUTION

The LED light may be hot, wait until the light is cool before replacement.

Filter Cleaning

To avoid fire, clean thoroughly once a month. Remove the filters and soak in hot water and detergent for an hour. If using a dishwasher, position the filters vertically to improve the cleaning process.

Important Notice

1. Make sure the filter is securely locked. Otherwise, it would loosen and cause abnormal noise and danger.
2. Using a carbon filter would reduce the air flow of the range hood.

Troubleshooting the Wall Mount Range Hood

Environmental Protection

Electrical products should not be disposed of as household waste. Please recycle where facilities exist.

Check with your local authority or retailer for advice on recycling.