VEVOR Geo Grid Ground Grid 9×17 ft, Geo Cell Grid 4 Inch Thick, Gravel Grid HDPE Material Manual

Unlock the full potential of your VEVOR Geo Grid Ground Grid 9×17 ft with our comprehensive product manual. This detailed guide provides step-by-step instructions for setting up, troubleshooting, and optimizing your Geo Cell Grid. Constructed from high-quality HDPE material, our 4-inch-thick Gravel Grid ensures superior ground stabilization and boasts an impressive tensile strength of 1885 lbs per square foot.

Whether you’re stabilizing slopes, reinforcing driveways, or enhancing your garden, our manual is an essential resource. Designed for ease of use, it helps you maximize the benefits of your gravel ground grid, enabling you to achieve professional results with confidence.

Download your VEVOR Geo Grid Ground Grid manual today and transform your project with expert guidance.

MODEL: 50-400/50-450/75-500/100-450

This is the original instruction. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual.

The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

IMPORTANT SAFEGUARDS

WARNING: Read and understand this manual before operating or servicing this product. Failure to follow these warnings and instructions can cause personal injury or damage to valuable property.

1. Avoid children using the geo grid. And this product is not a toy. Do not allow children to play with.
2. Keep away from sharp points, blades and other items.
3. Wear ANSI-approved work gloves during construction.
4. Keep the construction area well-lit.
5. Keep bystanders out of the area during construction.
6. Do not operate when tired or when under the influence of alcohol, drugs, or medication.
7. Product capabilities apply to a correctly and completely assembled product only.
8. For additional information regarding the parts listed on the following pages, please refer to the Assembly Diagram in this manual. Unwrap and separate all parts in a clean work area. Please keep small spare parts out of children’s reach.

SAVE THESE INSTRUCTIONS

GEO GRID GROUND GRID PREPARATION

• Clean the project area according to the requirements of the drawings, ensuring the flatness and cleanliness of the area.
• When the ground area is uneven, cleaning the ground or adding a layer of supplementary material to pave it is necessary.
• Before construction, calculate the size of each exposed compartment hopper based on the stretching length of each group of compartments. The excess part at the connection is generally not within the calculated length to prevent uneven hopper size and affect the appearance.

SIMPLE INSTRUCTION

LAYING PROCESS AND SPECIFIC METHODS

1. Unfold the bundled grid, place its outer edge along the grayline, and fix both ends with grid accessories, anchor rods to fill the soil inside the cell. Generally, fill it to two-thirds of the height of the geotechnical cell first, and compact the soil inside with an iron rod. The primary purpose is to facilitate the overall linear adjustment after forming the geotechnical cell.
2. At this point, the connection of the second compartment can be carried out, and the interior of the first compartment can continue to be filled with soil to a height exceeding two-thirds of the panel height. Then, use an iron rod to compact the soil with a heavy hammer. The remaining soil can be filled together during the filling of the wall cell until the entire cell construction is completed.
3. When adjusting the panel line type, attention should be paid to identifying parts that are not easily deformed for line control. For compartment panels, the accessories connected to the panel can serve as control points.
4. After positioning, the filling should be uniform to ensure uniform size inside the cell; In addition, fine-grained soil must used for filling the interior of the cell, especially in the areas that come into contact with the exposed materials of the cell panel, to avoid local bulges on the surface of the panel and affect its aesthetics.
5. For stacked flexible retaining walls, the panels are fixed as one with the wall, and there is no need to control the elevation of each layer. After controlling the elevation of the bottom layer, subsequent layers can be controlled according to the filling thickness.

Caution

It is necessary to pay attention to the weight of the rolling machine and use a construction machine suitable for the foundation condition.

Determine the height of the filling soil based on the foundation conditions, generally greater than or equal to 30 centimetres;

GEO GRID GROUND GRID SPECIFICATIONS

Made In China.