Unlock the full potential of your VEVOR Button Maker Machine with our comprehensive product manual! Our detailed guide is perfect for both beginners and seasoned crafters, offering step-by-step instructions for setup, troubleshooting, and optimization. The 0.98 inch/25mm Pin Maker with 500pcs Button Parts is designed with an ergonomic arc handle punch press kit, ensuring ease of use and efficiency.
Featuring the Panda Magic Book, this manual is a treasure trove of creative ideas for children’s DIY gifts and Christmas projects.
Download now and transform your button-making experience with in-depth tutorials and expert tips to help you create perfect pins with our button maker. Elevate your crafts, minimize setup time, and resolve issues effortlessly with our user-friendly manual.
Safety Reminder
Before using the button maker,
- This button-making machine is only used for the intended purpose. Don’t apply in other applications that exceed safety considerations.
- Children cannot operate the button maker unless accompanied by an adult.
- Pay attention to safety during operation, and avoid crushing fingers
Button Maker Components
Button Maker Installation Steps
Models and Parameters
Button Maker Failures and Troubleshooting
| Failure Appearance | Possible Reasons | Troubleshooting |
| First time, press the iron cover downward and not absorbed to the upper mold | 1. Unsuitable operating method. 2. Too much lubricating oil in the button maker’s upper mold. |
1. First-time downward press-up mold hinge is in a separate state. 2. Use a clean cloth or tissue to completely wipe it if too much lubricating oil is found on the upper mold. 3. When closing, the up and down mold must be on the same vertical line. |
| The second downward press part is not wrapped in | 1. Unsuitable operating method. 2. Unsuitable paper thickness. 3. Up mold screws loosen. |
1. The up and down mold must be on the same vertical line when closing 2. Use the stipulated thickness of paper. 3. Place the up mold on the machine body, the use the complimentary Allen key to fix the screws in the up mold internal hole center. |
| Badge pressed in but not firmly | 1. The downward press is not in place, not pressed to the bottom. 2. The paper is thinner. 3. (25 mm) Configured metal back consumables, do not place the washer |
1. Need to press the bottom when pressing downward. 2. Change to use a slightly thicker paper. 3. Right side mold place 2 mm thickness washer when using the metal back consumables. |
| Up mold unable to lift up after pressing, probably blocked | 1. The up and down mold position deviated. 2. The paper is incorrectly cut round or blocked by a foreign object. |
Use a sharp tool (such as a straight screwdriver) to align to the middle merge position clearance, which is between up and down mold, and pry open with the object like a hammer (Attention: Just tap it, generally, it will not be too tight) |
Recommended For Your Project
VEVOR Button Maker Machine, 0.98 inch/25mm Pin Maker with 500pcs Button Parts Manual
Reviews
There are no reviews yet.