VEVOR Electric Pressure Washer, 2150 PSI, Max. 1.8 GPM, 1800W Power Washer Manual

Unlock the full potential of your VEVOR Electric Pressure Washer with our comprehensive product manual. Designed specifically for the VEVOR Electric Pressure Washer, 2150 PSI, Max. 1.8 GPM, 1800W Power Washer. This manual offers detailed guidance on setup, troubleshooting, and optimization.

Whether you’re a seasoned user or a first-time owner, our user-friendly manual ensures you can maximize the efficiency of your power washer. Every step is covered from connecting the 26 ft hose and utilizing the 4 Quick Connect Nozzles to using the Foam Cannon for a thorough clean.

With easy-to-follow instructions and clear diagrams, you’ll effortlessly clean patios, cars, fences, and driveways. Download now to enjoy hassle-free maintenance and superior cleaning performance.

MODEL: HRH13P

This is the original instruction. Read all manual instructions carefully before operating. VEVOR reserves the right to interpret our user manual.

The appearance of the product shall be subject to the product you received. Please forgive us for not informing you again if there are any technology or software updates on our product.

Warning: To reduce the risk of injury, the user must read the instructions manual carefully.

INSTRUCTIONS

Congratulations on the purchase of your POWER WASHER!

You can use the POWER WASHER indoors or outdoors.

It is one of the finest, most powerful household power washers today. Please familiarize yourself with the following assembly, operating, and safety information.

Please read this manual before using the power washer. Failure to follow these instructions could cause personal injury, property damage, or both. Also, please save this manual for other users to read before using the power washer.

SAFEGUARDS, WARNINGS, AND SAFETY TIPS

IMPORTANT SAFETY INSTRUCTIONS: SAVE THESE INSTRUCTIONS.

WARNING ‒ When using this product, follow the basic precautions, including the following:

1. To avoid personal injury and/or property damage and maximize your power washing experience, carefully follow all of the safety tips, instructions, warnings, and safeguards, and become familiar with all of the controls. Be sure you know how to quickly bleed off the pressure from all parts of your power washer, and how to turn off the power Washer.
2. This power washer conforms to safety and consumer standards. Do not modify or rebuild any part of your power washer.
3. Do not use your power washer when you are under the influence of alcohol or drugs. Use this power tool carefully and only when you are alert.
4. Watch your balance and footing while using your power washer. Surfaces become slippery when wet and are extra slippery when using detergent or cleaner.
5. Never operate the power washer in bare feet, sandals, or open-toed shoes.
6. When using the power washer near children, make sure an adult closely supervises them to avoid injury. Never let a child use the power washer.
7. When you press the power switch to turn off the power washer, water pressure may remain in the system. To discharge the pressure, point the spray gun in a safe direction and pull the trigger.
8. Never spray flammable liquids.
9. Never use the power washer in areas that contain combustible dust, liquids, or vapors.
10. Keep operating area clear of all persons.
11. Do not overreach or stand on unstable support. Keep good footing and balance at all times.
12. Follow the maintenance instructions specified in the manual.
13. Avoid contact with sharp objects and examine the pressure hose regularly. Replace it if damaged. Due to the high pressure involved, it cannot be repaired if cut or damaged.
14. Only use detergent formulated explicitly for power washers and follow instructions on the detergent’s label.
15. Power washer detergents are available at your local hardware store.
16. Protect eyes, lungs, and skin from exposure to detergent. Dish or laundry soap is too thick and will clog the nozzle of your detergent tank.
17. WARNING ‒ Risk of Injection or Injury‒ Do Not Direct DischargeStreamAtPersons. WARNING: If Connection Is Made To A Potable Water System, The System Shall Be Protected Against Backflow.
18. Never use hot water with your power washer. It will overheat and damage the high-pressure pump.
19. IMPORTANT: Store the power washer indoors to prevent the water in the unit from expanding under freezing conditions. When the water freezes and expands, your power washer will be damaged and inoperable. After disconnecting the water supply and before disconnecting the high-pressure hose, turn the pressure washer on for 2-3 seconds, then turn the Unit off immediately.
20. Never leave the power washer unattended while it is powered“on”.
21. Always turn the water supply“on ”before turning the power washer power to “on”. Running the pump dry will cause damage to the internal components.
22. Never use a water supply to your power washer that exceeds 150psi.
23. Keep fingers, hands, feet, and any part of your body clear of the high-pressure water stream. The powerful spray can cause blindness or blast holes in the skin. It can break a window if you are too close when you pull the trigger on the spray gun.
24. Always wear eye protection to prevent eye injury when operating the power washer.
25. Always use the trigger safety lock when not using the power washer to avoid mishaps or injury, even if the spraying stops momentarily.
26. The power washer is equipped with a Ground Fault Circuit Interrupter (GFCI) built into the power cord plug, significantly reducing the chance of electric shock while the unit is in use. Use identical replacement parts to the plug or cord when needed.
27. Point the spray gun in a safe direction when beginning a power washing session.
28. When first using the spray gun, hold the spray gun and lance with two hands when pulling the trigger until you get used to the “kick back” from the spray gun (one hand to pull the trigger and the other to stabilize the gun assembly).
29. Never disconnect the high-pressure hose from the power washer while the system is pressurized.
30. Never permanently engage the trigger mechanisms on the spray gun.
31. Never operate the power washer unless all components are properly and securely connected.
32. Never allow the power washer pump to run for more than one minute after you have contained combustible dust, liquids, or vapors that might turn off the water supply. This can cause the motor and pump to overheat and fail.
33. Never use lances or other parts not supplied with your power washer.
34. Never use an extension power cord since it defeats the effectiveness of the GFCI and increases the chance of electrocuting the operator.
35. Never spray any electrical outlet with your power washer.
36. Inspect the power cord before using. Do not use it if faulty.

GROUND FAULT CIRCUIT INTERRUPTER PROTECTION

This pressure washer has a ground-fault circuit interrupter (GFCI) built into the power supply cord plug. This device provides additional protection from the risk of electric shock.

Only use identical replacement parts that include GFCI protection if repair is necessary.

SERVICING OF A DOUBLE-INSULATED APPLIANCE

In a double-insulated product, two insulation systems are provided instead of grounding. Grounding means are not provided for a double-insulated product, nor should grounding means be added to the product. Servicing a double-insulated product requires extreme care and knowledge of the system and should only be done by qualified service personnel.

Replacement parts for a double-insulated product must be identical to the original parts. A double-insulated product is marked with “Double Insulation” or “Double Insulated”.

SAVE THESE INSTRUCTIONS

Electric Pressure Washer Technical Data

Unpacking the Electric Pressure Washer

When unpacking this product, check to make sure all listed parts are included and carefully inspect for any damage that may have occurred during transit.

Do not attempt to assemble or use the product if any part is missing or damaged.

PREPARATION OF OPERATION

HOW TO SET UP YOUR UNIT

1) Mounting the wheel assembly

• Install the wheels on the rear housing and press them down.
• Install the accessories rack on the rear housing and fix four screws. (M4*16mm).

2) Mounting the handle and the hose hook

• Slide the handle to the machine, and fix four screws (M4*22mm).
• Install the hose hook on the long handle, and fix four screws (M4*16mm).

3) Mounting the gun hook and power cord holder

• On the machine’s left, slide the gun hook A on the upper side of the handle and the gun hook B on the lower.
• Slide the power cord holder to the right of the machine.

4) Attach the quick lance to the gun

Note: When the machine is not started, align the two projections on the lance with the grooves on the gun when assembling.

Insert the nozzle

Grasp the top metal ring with your left hand and pull it downwards without
releasing it. Insert the nozzle directly into the wand. Release the metal ring with your left hand to lock it in place.

Pull out the nozzle.

Grasp the top metal ring of the wand with your left hand, squeeze it down, and continue pulling the nozzle out of the wand with force, without releasing the ring.

5) Screw the high pressure hose onto the water outlet pipe.

Push and turn it (clockwise) tightly to avoid leakage. When the pieces are correctly joined, you cannot separate the two components by pulling straight out from the water outlet.

CAUTION: Please ensure the high-pressure hose is uncoiled before operating the machine.

Whilst the machine is in operation, the high-pressure hose MUST NOT loop.

6) Attach the other high-pressure hose to the gun.

Note: After the high-pressure hose is connected, check the connection by gently pulling on it to ensure it stays connected. Push the lock button and pull to detach the high-pressure hose.

To detach the hose easily, please pull the trigger to drain water from the wand when the operation is completed and the switch is in the “OFF/0 ”position.

7) Attach the garden hose.

Connect one end of the home garden hose (not supplied) to the adapter and the other to the water source.

WARNING: The appliance is INTENDED to be used at a temperature above 0 degrees.

8) Connect the Electric Pressure Washer to the power supply

• Plug the pressure washer into the power outlet.
• Press the TEST button, and the power will be cut, and the indicator will fade. Do not use if this test fails. We recommend pressing the test button every time before using the pressure washer to ensure the protector works.
• Press the RESET button, and the indicator will illuminate, indicating that the power is on for use.

Operating the Electric Pressure Washer

TO WASH WITH WATER

Follow these steps:

1. Turn on the water supply tap

Connect the washer to the power supply, turn the switch to the “ON/1” position, and press the trigger.

Note: Before pressing the trigger, ensure the lock-off switch is in the “unlock” position.

Warning: Do not start the machine without connecting and turning on the water supply. Doing so may damage high-pressure seals and reduce the pump’s service life.

2. Release the trigger and turn the switch to the “OFF/O” position.

Turn off the water supply tap.

Note: Ensure the Lock-off switch is in the “Lock” position when not in use.

3. Select the correct nozzles.

The gun is equipped with 4 kinds of quick-connect nozzles (0°, 15°, 25°, 40°) and 4 types of water jet shapes, as shown below.

Please turn off the gun when changing nozzles. With your left hand, move the stop ring of the quick connector seat on the spray gun, install the quick connect nozzle onto the spray gun quickly, loosen the stop ring, and push back to its original position.

Warning: High-pressure jets can be dangerous if subject to misuse. DO NOT direct the jet at persons, live electrical equipment, or the appliance itself.

Warning: Do not direct the jet against yourself or others to clean clothes or footwear.

You need to turn the spray gun off when changing nozzles.

4. Cleaning the Electric Pressure Washer

Begin with the nozzle 1-2ft away from the surface and approach cautiously until it reaches the desired position, for overly close spray may harm the surface.

Warning: Do not connect the machine to dirty, rusty, muddy, or corrosive water supplies (including window cleaning liquids, plant foods, fertilizers, etc.).

5. Add and use detergent

• Fill it with a properly formulated detergent or cleaner with a water ratio according to the instructions on the container. Connect the nozzle to the wand.

• Squeeze the wand trigger, and detergent will come out through the nozzle.
• Apply detergent so it thoroughly covers the cleaning surface.
• Allow the detergent to remain on the surface for a few minutes. This is a good time to use a brush to scrub lightly heavily soiled areas.
• Change to spray nozzle, rinse detergent from the surface.
• Cleaning up: When finished, always draw fresh water through the detergent bottle to flush any remaining detergents from the injection system. Detach the bottle, if necessary, in this process.

Electric Pressure Washer Maintenance

WATER FILTER AND NOZZLE CLEANING INSTRUCTIONS

A clogged or partially clogged water filter or nozzle can cause a significant reduction of water pressure coming out of the nozzle and/or cause the unit to pulsate while spraying.

• Clean the water filter installed inside the water inlet quick connector periodically. Rinse it with clean tap water, and then place it back into the water inlet quick connector

• Using the nozzle tip cleaner provided ( or an unfolded paper clip), insert the wire into the nozzle hole and move back and forth until you dislodge the debris. Back flush water through the nozzles using a garden hose and the highest pressure available (either a standard water nozzle or your thumb over the nozzle to create water pressure for back flush).

Electric Pressure Washer Storage

Do not store an Electric Pressure Washer outdoors, where it might freeze, or where there is water inside the machine. Serious damage will occur to the water system, pump, and/or motor.

TIPS FOR EXTENDING THE LIFE OF YOUR PRESSURE WASHER

Never operate the machine without water.

DON’T USE HOT WATER. Never connect it to the hot water supply; this will significantly reduce the pump’s life.

Using detergents other than those formulated for pressure washers may damage pump components (o-rings, etc.). This also applies to chemicals such as bleach and dish soap.

Never operate the unit for more than one minute without spraying water, resulting in heat buildup.

Electric Pressure Washer Troubleshooting & FAQs