VEVOR Tap and Die Set, 110-Piece Include Metric Size M2 to M18 Manual

Unlock the full potential of your VEVOR Tap and Die Set with our comprehensive product manual download. This all-inclusive guide is designed for both novice and experienced users, providing step-by-step instructions for setting up, troubleshooting, and optimizing your 110-piece threading tool.

Covering metric sizes M2 to M18, our manual ensures you can efficiently cut external and internal threads with precision and ease. These taps and dies are essential for any threading task made from durable bearing steel.

The manual includes detailed illustrations and tips for maintaining your tools, ensuring long-lasting performance. Download now and get the most out of your VEVOR Tap and Die Set, complete with accessories and a sturdy storage case.

TAP AND DIE SET MANUAL 110pc

Alloy Steel Tap And Die Set Detailed List

110pc

• 35 pcs Taper Taps:
• M2x0.4, M3x0.5, M4x0.7, M5x0.8,
• M6x0.75, M6x1.0, M7x0.5, M7x1.0,
• M8x0.75, M8x1.0, M8x1.25, M9x0.75,
• M9x1.0, M9x1.25, M10x0.75, M10x1.0,
• M10x1.25, M10x1.5, M11x0.75,
• M11x1.0, M11x1.25, M11x1.5,
• M12x0.75, M12x1.0, M12x1.25,
• M12x1.5, M12x1.75, M14x1.0,
• M14x1.25, M14x1.5, M14x2.0,
• M16x1.0, M16x1.5, M16x2.0, M18x1.5.
• 35 Plug Taps: Size as taper taps
• 35 Dies: Size as taper taps
• 2-pc Tap Wrench: M3-M12 M6-M20
• 2-pc Die Wrench: 25mm 38mm
• 1-pc T-type Tap Wrench

Use Instructions:

1. Select the Correct Tap or Die:

   • Identify the size and thread pitch required.

   • Choose from the 35 taper taps, 35 plug taps, or 35 dies matching your thread size (M2–M18).

2. Prepare the Material:

   • Secure the metal workpiece in a vise.

   • Drill a hole slightly smaller than the tap size for internal threading.

   • For external threading, ensure the rod is clean and chamfered at the end.

3. Install Tap or Die in Wrench:

   • Insert the tap into the correct tap wrench (M3–M12 or M6–M20).

   • Place the die into the appropriate die wrench (25mm or 38mm).

   • For small taps, use the T-type tap wrench for better control.

4. Threading Process:

   • Apply cutting fluid or oil to reduce friction and heat.

   • Turn the tap/die slowly and evenly.

   • Every complete turn forward, reverse a half-turn to clear chips.

   • Continue until the whole thread is formed.

5. Finishing:

   • Back out the tap or die carefully.

   • Clean the threads and tool with a brush.

   • Apply anti-rust oil before storage.

Tap and Die Set Use Precautions

• Always use proper lubrication to extend tool life and improve thread quality.

• Do not apply excessive force—taps and dies can break under pressure.

• Ensure the tool is aligned correctly with the hole or rod to avoid cross-threading.

• Never use a damaged tap and die set—they may produce poor threads or snap.

• Store all tools in the provided case to prevent rust and tool mix-ups.

• Avoid using on hardened metals not rated for this alloy steel set.

• Clean chips frequently during use to prevent clogging and jamming.

• Do not reverse direction suddenly; it can cause breakage.