VEVOR Storage Shelving Unit, 5-Tier Adjustable, 2000, lbs Capacity Manual

Unlock the full potential of your VEVOR Storage Shelving Unit with our comprehensive product manual download. Designed to guide you through every step, this manual provides detailed instructions for the setup, troubleshooting, and optimization of your 5-tier adjustable shelving unit.

With a robust 2000 lbs capacity, this heavy-duty garage shelf is perfect for organizing your kitchen, pantry, basement, bathroom, or laundry area. Our user-friendly manual ensures you can easily assemble and customize your 48″ L x 24″ W x 72″ H metal organizer utility rack.

Whether you’re a DIY enthusiast or a professional, this manual offers invaluable insights to enhance the functionality and durability of your black VEVOR shelving unit. Download now to get started on creating a more organized and efficient space.

VEVOR STEEL STORAGE SHELVING UNIT MANUAL

MODEL: ZMV0 / TAV0 / 5KV0 / SCV0

WARNING

1. Keep this manual for the safety warnings and precautions. The manual offers important information on how to assemble, use, and maintain this product.
2. Please handle metal edges carefully.
3. DO NOT stand on this product or use it as a ladder.
4. DO NOT alter this product in any manner that is not intended, asthismay cause product damage or personal injury.
5. Always assemble on an even surface.
6. The maximum loaded weight for each shelf is no more than 180 kg, evenly distributed.
7. Store the heaviest items on lower shelves.
8. Attach the unit to the wall if filling (fittings not included).

ASSEMBLY PRECAUTIONS

1. Please assemble the product in strict accordance with the instructions. Incorrect assembly could be hazardous.
2. Please wear safety goggles and work gloves properly during assembly.
3. Do not try to assemble the product when feeling tired or when under the influence of alcohol, drugs, or medication.
4. Load bearing capacity and other product parameters are applied to the wholly and correctly assembled product only.
5. A hammer and a pair of gloves may also be used, provided a cloth or wood block is placed between the hammer head and the parts.

USE PRECAUTIONS

1. This product is not a toy. Do not allow children to play withor get accessto this item.
2. Check carefully before use. Do not use if parts get loosened or damaged.
3. Use on flat, level, and hard surfaces only.
4. Do not exceed the listed load-bearing capacity. Tighten all the knobs securely before placing weights on. Be aware of the dynamic load-bearing capacity! Sudden load changes may temporarily cause excessive load, resulting in product failure.

SAVE THESE INSTRUCTIONS

PRODUCT PARAMETERS

STORAGE SHELVING UNIT PART LIST

ASSEMBLY STEP

Step 1: Post Cap Assembly

Slide each post (B) into the post cap (F) as shown.

Repeat for all four upright posts.

Attention: post caps for upright feet only

Step 2: Short and Long Beam Assembly

1. Align short beams (D) & top shelf long beam (C) to aligned notches between four upright posts (B).
2. Once in position, tap firmly using a rubber mallet.
3. Repeat the process for the opposite side, ensuring both ends are set at the same height.

Step 3: Fixings Assembly

Fix fixings (E) at the top of the upright post (B), and tap down to the end.

Step 4: Install The Upright Post

The bottom of the upright post(B) is secured to each fixing(E) and tapped down to the end.

Step 5: Install the third, fourth, and fifth top shelf long beam(D) and short beam(C) using the same installation method as Step 2.

Step 6: Install the Reinforcer.

Install part G on each part D.

Step 7: 7mm MDF Top Shelf Assembly

• Insert 7mm MDF top shelf (A) onto the top shelf supports.
• Ensure it sits flush with the top of the unit frame.

Step 8: Install The Top Glue Foot

1. Slide each post (B) into post cap (F) as shown.
2. Repeat for all 4 upright posts.
3. Assembly is now complete, and your unit is ready for use.

Attention: This product can be separated into two shelves. You can find the height of each shelf in the table of the part list.

Made In China