VEVOR 4PCS Machinery Skate Dolly, 17637 LBS/8T Manual

Unlock the full potential of your VEVOR 4PCS Machinery Skate Dolly with our comprehensive product manual. Designed for ease of use, this manual is your ultimate guide for setup, troubleshooting, and optimization of the 17637 LBS/8T Industrial Machinery Mover.

Whether you’re using this heavy-duty carbon steel machinery skate in a warehouse, workshop, or factory, our detailed manual covers everything you need to know. From the 4 PU wheels to the 360° rotation non-slip cap, every feature is explained with clear, step-by-step instructions and helpful visuals.

Download today and ensure your machinery moving skate operates at peak performance, providing you with a seamless and efficient experience.

Machinery Skate Dolly Manual

WARNING

• Read carefully and understand all ASSEMBLY AND OPERATION INSTRUCTIONS before operating.
• Failure to follow the safety rules and other basic safety precautions may result in serious personal injury.

GENERAL SAFETY RULES

1. Using the machine skate dolly on flat, hard ground is recommended.
2. Using this product on uneven or soft ground is strictly prohibited and can cause property and personal injury.
3. This product is unsuitable for use on sloping ground; otherwise, accidents will occur easily.
4. Do not use more than the product load capacity.
5. Because the ground is not smooth, the wheels of each mover may not be all involved in the work. However, it is recommended that it be used under the nominal load.
6. This product should be moved slowly at an allowable speed, as excessive speed can easily cause the mover to slide out. Accidents happen easily.
7. When the load is lighter, the mover’s steering performance is good; conversely, it is not good. Do not swerve when the operator is struggling to turn. Crowbar lifting is recommended to assist the mover in steering.
8. Avoid collisions when using this machinery skate dolly; otherwise, the product cannot be used due to damage.
9. We do not recommend using a single or two movers together to carry large Furniture; such use is not safe. For heavy Furniture, three or four movers are usually used together.
10. Due to the high center of gravity of high and narrow furniture, mover handling measures are required to prevent possible overturning.
11. When multiple movers are used together, non-slip mats are added to ensure consistency in height. When handling, the direction of each mover should be consistent. Otherwise, it is difficult or impossible to move. When turning, lifting the weight slightly with a crowbar and other tools to facilitate the mover’s turn is suggested.

SAVE THESE INSTRUCTIONS

Machinery Skate Dolly Model and Parameters

Structure Diagram

Machinery Skate Dolly Components

Operating Instructions

• Use a large pry bar or hydraulic jack to lift the equipment.
• Place the industrial machinery movers at the bottom of the equipment.
• Ensure that the equipment is placed in the load-bearing center of the industrial machinery mover.
• This product should be moved slowly at an allowable speed, as excessive speed can easily cause the movers to slide out.

NOTE: Due to the different weights and sizes of the equipment, there are five styles to choose from when choosing the industrial machinery mover model, as shown below.

2 Steering Modes For Reference:

Machine Skate Dolly Maintenance

1. After using the mover, remove the wheel of iron filings and other sharp objects, and store in a dry environment.
2. Regularly inspect the mover. Replace the bearings if the wheel rotation is not flexible, there is ample bearing clearance, or there is noise; replace the wheel in time if it is damaged.
3. After use, the PU Wheel’s mover should be cleaned in time because the wheel can easily be damaged by sharp objects such as iron filings, sand, oil, etc.
4. If the surface paint of the mover is damaged, it is recommended to be repaired in time to avoid rusting.

Made In China.

 

VEVOR 4PCS Machinery Skate Dolly, 17637 LBS/8T Manual