VEVOR Ivy Privacy Fence, 59 x 98 in Greenery Ivy Fence Manual

Discover the ultimate guide to enhancing your outdoor spaces with our comprehensive VEVOR Ivy Privacy Fence manual. This detailed product manual covers everything you need about the 59 x 98 in Artificial Green Wall Screen, designed with a Greenery Ivy Fence and Mesh Cloth Backing.

Our manual provides step-by-step instructions for setup, ensuring you can easily install your Faux Hedges Vine Leaf Decoration in your garden, yard, or balcony. Troubleshooting tips and optimization advice are included to help you maintain the vibrant look and strengthened joints of your ivy fence, making this guide an invaluable resource for novice and experienced users.

Download the VEVOR Ivy Privacy Fence manual today to unlock the full potential of your outdoor décor and effortlessly create a lush, private oasis.

ARTIFICIAL IVY PRIVACY FENCE USER MANUAL

MODEL: JNF01201/ JNF01202/ JNF010/ JNF009/ JNF008/ JNF007/ JNF013/ JNF006/ JNF011/ JNF015

Catalogue

1. Technical Parameters
2. Safety Precautions
3. Instructions for Use

1. Technical Parameters

2. Ivy Privacy Fence Safety Precautions

WARNING:

Read this material before using this product. Failure to do so can result in serious injury.

SAVE THIS MANUAL

Assembly Precautions

1. Assemble only according to these instructions. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly.
3. Keep the assembly area clean and well-lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or under the influence of alcohol, drugs, or medication.
6. Product capabilities apply to correctly and completely assembled products only.

Use Precautions

1. Do not sit or stand on this item.
2. This product is not a toy. Therefore, do not allow children to play with the item.
3. Use as intended only.

3. Instructions for Ivy Privacy Fence Use

Assembly(No tools required)

1. Observe the direction of the foliage

• Boxwood & Fem: Multi-directional
• Ivy &Lavender. Follow the direction of the foliage.

2. Connect panels using the easy snap-to-lock system.

3. For simple and quick installation, strip two panels wide by the desired height.

Chain Link, Wire Mesh & Wrought Iron

Tools: Green zip ties(Not Included)

1. Fasten the first panel or connected set of panels directly to the support.

2. Repeat progressing laterally (clip panel sections together before fastening to the support for a perfect fit.)

Drywall and Wood

Tools: 1/2in.*1/2in. Crown 20 Gouge Staples & Stapler (Not Included)

1. Fasten the first panel or connected panels directly to the top of the wall or service. Use additional staples on the top panel in each column.
2. Place 2 Staples on the edges of each panel, making your way down to the bottom panel.
3. Repeat progressing laterally (clip panel sections together before fastening to the support for a perfect ft).

Concrete, Brick, or Block

Tools: 3/ 16 in.*13/4 in. Washer Head Concrete Screw Anchors, Drill Bit & Drill (Not Included)

1. Hold a single panel at the top of the wall or surface. Then, using your drill and drill bit, drill one hole in the top left & suitable square holes found on the backing grid of the panel. Drill each hole approximately 1/4 inch deeper than the anchor screw being used.
2. Screw a washer head concrete anchor in each hole, securing the panel to the surface.
3. Repeat processing downward til a single column is complete, ensuring the panels are securely fastened as you progress.
4. Repeat steps 1-3 until your installation is complete.