VEVOR Tire Bead Seater, 5 Gal/19L Air Tire Bead Blaster Manual

Unlock the full potential of your VEVOR Tire Bead Seater with our comprehensive product manual download. Designed specifically for the 5 Gal/19L Air Tire Bead Blaster with Pressure Gauge & Handle, this manual provides an in-depth guide to setup, troubleshooting, and optimizing your tool’s performance.

Whether you’re inflating tires for cars, trucks, or ATVs, this manual covers everything you need to know about operating your bead seater at its 85-116 PSI range and achieving the perfect 145 PSI seating pressure. With user-friendly instructions and detailed illustrations, this manual ensures you can easily navigate the entire process, making tire inflation straightforward and efficient.

Download now to get the most out of your VEVOR Tire Bead Seater and enhance your tire maintenance routine easily and precisely.

VEVOR Tire Bead Seater User Manual

Model: XJC-019

Tire Bead Seater Technical Parameters

Safety Precautions

WARNING! Read and understand all instructions before using this bead seater. The operator must follow basic precautions to reduce the risk of personal injury and/or damage to the equipment.

DANGER! This notice indicates an immediate and specific hazard that will result in severe personal injury or death if the proper precautions are not taken.

WARNING! This notice indicates a specific hazard or unsafe practice that could result in severe personal injury or death if the proper precautions are not taken.

CAUTION! This notice indicates a potentially hazardous situation that may result in minor or moderate injury if proper practices are not taken.

WORK AREA

1. Operate in a safe work environment. Keep your work area clean, well-lit, and free of distractions.

2. Keep anyone not wearing the appropriate safety equipment away from the work area.

3. Store the unused bead setter properly in a safe and dry location to prevent rust or damage. Lock the bead seater away and keep it out of the reach of children.

PERSONAL SAFETY

WARNING! Wear personal protective equipment approved by the Canadian Standards Association (CSA) or the American National Standards Institute (ANSI).

PERSONAL PROTECTIVE EQUIPMENT

1. It is recommended to use ear protectors and safety glasses when using the bead seater. Eye protection equipment should comply with CSAZ94.3-07or ANSI Z87.1 standards based on the type of work performed.

2. Wear gloves that provide protection based on the work materials or reduce the effects of tool vibration.

PERSONAL PRECAUTIONS

Control the bead seater, personal movement and the work environment to avoid personal injury or damage to the bead seater.

1. Do not operate any bead seater when tired or under the influence of drugs, alcohol or medications.

2. Avoid wearing clothes or jewellery that can become entangled with the moving parts of a bead seater. Keep long hair covered or bound.

SPECIFIC SAFETY PRECAUTIONS

1. Use the correct bead seater for the job. This bead seater was designed for a specific function. Please do not modify or alter this bead seater or use it for unintended purposes.
2. Ensure that the bead seater is correctly installed before using.
3. The air pressure in the gas tank cannot exceed 10 bar. If it exceeds10bar, the safety valve on the gas tank will automatically open to ensure personal safety.
4. The tire is placed accurately with the rim resting against the object to reduce the clearance between the tire and the rim.
5. The black exhaust pipe must be in close contact with the steel ring, and the hand holding the gas tank must be very strong, because there will be recoil when opening the Exhaust valve to ensure personal safety.
6. Putting the pressure gas in the inflatable tank is forbidden when not in use.
7. Never allow the nozzle to point in the direction of a person.

WARNING! DO NOT let comfort or familiarity with a product (gained from repeated use) replace strict adherence to the bead seater rules. If you use this bead seater unsafely or incorrectly, you can suffer serious personal injury.

WARNING! Direct exposure of pressurized air to skin could result in severe bodily injury.

SAVE THESE INSTRUCTIONS

Tire Bead Seater Package List

• 1×Gas tank assembly
• 1×exhaust pipe
• 1×manual

Tire Bead Seater Structure Diagram

Instructions For Using the Tire Bead Seater

1. Close the exhaust valve, open the intake valve, fill the compressed air in the air compressor into the gas tank through the air pipe through the quick connector, pay attention to the air pressure not exceeding 10bar, then close the intake valve.

2. The tire should be placed accurately. The rim leans against the object to reduce the gap between the tire and the rim.

3. Take the inflatable tank to the side of the tire, and make the black exhaust pipe come into close contact with the steel ring, hold the edge of the steel ring, and the sharp iron plate under the exhaust pipe contacts the tire.

4. Open the Exhaust valve, and the high-pressure gas in the tire will be released instantly, so that the tire and steel ring will be sealed immediately, and the inflatable tank will be removed. Then, another inflation pipe is used to inflate through the valve until the tire is full and the work is over.

Scope of Application

Car-SUV, Bike, Truck, ATV, Lawn Tractor, Tractor, Motorcycle, Comper