Unlock the full potential of your VEVOR Walk-behind Hand Push Floor Sweeper with our comprehensive product manual download. This manual is your ultimate guide to effortlessly maintaining and optimizing your 25.6″ Sweeping Width Floor Sweeper. Designed with user-friendly instructions and detailed troubleshooting tips, the manual covers everything from initial setup to advanced maintenance procedures.
The VEVOR Floor Sweeper is equipped with a 5-gallon Waste Container and an Angle and Height-Adjustable Folding Handle, making it perfect for any walkway, yard, garage, or patio.
Our manual ensures you get the most out of these features, enhancing your cleaning efficiency and prolonging the life of your sweeper. Whether you’re a seasoned user or new to the product, this manual will help you easily and confidently navigate every aspect of your floor sweeper.
VEVOR Walk-behind Hand Push Floor Sweeper User Manual
Model: S13-001A
DANGER!
Some safety precautions must be observed when using equipment to prevent injury and damage. Please read these operating instructions and safety instructions carefully. Keep them well so that you always have the information.
If you should hand over the device to other persons, please hand over these operating and safety instructions. We assume no liability for accidents or damage caused by non-compliance with these and the safety instructions.
The device and packaging material are not children’s toys! Children are not allowed to play with plastic bags, foils, or small parts, as they can cause ingestion and asphyxiation!
ACCESSORY CONTENT
- Sweeper
- Upper push bar
- Feeding brushes (2x)
- Connection knob (2x)
- Support disc (2x)
- Waste container
- Lower push bar
- Nut with quick release function (2x)
- Cap (2x)
- Original operating instructions
- Screw (2x)
SAFETY INSTRUCTIONS
Warning
Read all safety instructions, operating instructions, illustrations and technical data provided with this device. Failure to follow the instructions can cause serious injury.
Safety information and instructions for the future.
- Attention: Before installation and commissioning, observe the instructions for use.
- Never clean the appliance with solvents.
- Do not leave the appliance unattended. Protect from access by children.
- Store the appliance in a dry room.
- Do not operate a defective device.
- Use the device only for the work for which it was designed.
- Use only original accessories and spare parts.
- For damage caused by improper repairs and improper handling. We cannot assume liability for any alienation of the application areas. Replace defective parts immediately.
- Do not pick up glowing or harmful objects with the sweeper. The removal of gel-shaped, liquid, flammable and explosive substances is not permitted.
- Firm work gloves should be worn when emptying the waste container after removing metal, glass, or sharp objects.
PRODUCT PARAMETER
DEVICE DESCRIPTION
- Open the package and carefully remove the device from the package. Remove the packaging material as well as the packaging/transport fuses (if available).
- Check that the delivery is complete.
- Check the appliance and accessories for damage in transit.
- If possible, store the packaging until the end of the warranty period.
INTENDED USE
The Walk-behind Hand Push Floor Sweeper is intended for sweeping flat and dry surfaces such as driveways, patios, yards, etc.
The machine may only be used as intended.
This device is not designed for commercial or industrial use.
PRODUCT ASSEMBLY
Installation of feed brushes (Figure 3-6)
- Insert the feed brush onto the sweeper.
- Then attach the feed brush with the cap.
- Pay attention to the lettering on the cap. Turn the cap in the direction of the arrowhead.
- Repeat the procedure on the other side.
- To disassemble the feed brushes, turn the cap in the direction, remove the cap and the feeding brush.
MOUNTING OF PUSH BARS (FIGURE 7-10)
Mount the lower and upper push bars as shown in Figures 7 to 10. The height of the push bar can be adjusted by selecting the second mounting hole.
OPERATION
The feed brushes and the sweeping brush are rotated via the belt drive by pushing the sweeper. The rotating feed brushes sweep the dirt to the center. This is collected by the sweeping brush and transported to the waste container.
EMPTYING THE WASTE CONTAINER (FIGURE 11)
Warning! Dust can be hazardous to health. Wear a dust mask!
Remove the waste container from the appliance as shown in Figure 11. Empty and insert the waste collector connect it back into the device.
PARKING POSITION (FIGURE 8, 12, 13)
The device can be folded for space-saving storage. To do this, loosen the lower nuts with the quick-release function until the pins (Figure 8) pop out of the fixation and unfold the push bar (Figure 12). Alternatively, the upper nuts with the quick-release function can be loosened afterwards.
CLEANING AND MAINTENANCE
- Keep guards and air vents as dust and dirt-free as possible.
- We recommend that you clean the appliance immediately after each use and regularly with a damp cloth and soap.
- Do not use detergents or solvents; these could attack the device’s plastic parts.
- Make sure that no water can enter the appliance’s interior.
STORAGE
Store the appliance and its accessories in a dark, dry and frost-free place. The optimal storage temperature is between 5 and 30°C. Keep the power tool in its original packaging.
TROUBLESHOOTING THE HAND-PUSH FLOOR SWEEPER
Recommended For Your Project
VEVOR Walk-behind Hand Push Floor Sweeper, 25.6" Manual
Reviews
There are no reviews yet.