VEVOR Laser Level, 100ft, Self Leveling Manual Green Manual

Unlock the full potential of your VEVOR Laser Level with our comprehensive product manual download. Designed for the 100ft, Self-Levelling Manual Green 3 x 360° Cross 16 Line Laser, this manual is your ultimate guide to mastering the device.

Whether you are setting up, troubleshooting, or optimizing the laser level, our detailed instructions ensure a smooth and efficient experience.

With clear, step-by-step guidance, you can effortlessly navigate the features of your IP54 Waterproof laser, utilize the remote control, and explore the manual self-levelling mode. The guide also covers the impressive 5-hour continuous working time, ensuring you get the most out of your line laser. Download now and make your VEVOR Laser Level work for you easily and precisely.

VEVOR Laser Level User Manual

MODEL: CM03/04

Safety

WARNING:

Read the Safety Instructions and User Manual thoroughly before using this product. All users must fully understand and adhere to these instructions.

CAUTION:

While the product operates, avoid exposing your eyes to the emitting laser beam. Exposure to a laser beam for an extended time may be hazardous to your eyes.

CAUTION:

Some laser tool kits may include glasses. However, these are NOT certified safety glasses. They are ONLY used to enhance the beam’s visibility in brighter environments or at greater distances from the laser source.

WARNING:

The following label/print samples are placed on the product to inform the laser class for your convenience and safety.

• Do not stare directly into the beam, view with optical instruments, or set up the laser at eye level.
• Do not disassemble the laser tool. There are no user-serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may result in hazardous Laser Radiation Exposure.
• Do not operate the VEVOR laser level around children or allow children to operate the laser. Serious eye injury may result. An exposure to the beam of a Class 2 laser is considered safe for a maximum of 0.25 seconds. Eyelid reflexes will normally provide adequate protection.

VEVOR Laser Level Functions

CM03 can emit three 360° laser lines, one horizontal and two vertical.

CM04 can emit four 360° laser lines, horizontal and vertical.

Self-leveling Mode

Slide the lock switch to the unlocked position, and the horizontal line turns on.A short press of H can turn ON/OFF the horizontal laser line, and a quick press of V can turn ON/OFF the vertical laser line. (The horizontal and vertical laser lines can work singly and simultaneously.)

When the laser level is in Self-levelling mode, it can work within 3°±1°. If the laser level is out of working range, the unit will flash rapidly, and the laser tool will beep to alert.

Pulse Mode

Press “M” on the keypad to activate the Pulse Mode. The beams will turn dim, and it can work with the laser receiver in this mode.

Manual Mode

Long-press “M”to turn manual mode on/off. The laser level doesn’t flash or beep if it’s out of the leveling range. In this mode, the customer can have the tilt line.

Brightness Adjustment Mode

Hold the “H” button, and all the beams turn dimmer until the lines can’t be seen. Hold the “V” button and all the beams turn brighter, then brightest. This operation can work both in the self-leveling mode and the manual mode.

User Guide, Maintenance and Care

• The VEVOR laser level is sealed and calibrated at the plant for specified accuracy.
• It’s recommended to carry out an accuracy check before its first use and periodic checks during future use, especially for precise layouts.
• When not in use please power OFF the tool and place the pendulumlockinits locked position.
• In Manual Mode, self-levelling is OFF. The accuracy of the beam is not ensured to be level.
• Do not short any battery terminals, charge alkaline batteries, or dispose of batteries in a fire.
• Do not mix old and new batteries. Instead, all of them can be replaced simultaneously with new batteries of the same brand and type.
• Keep batteries out of reach of children.
• Remove batteries if the tool will not be used for several months.
• Do not store the laser tool in direct sunlight or expose it to high temperatures. The housing and some internal parts are made of plastic and may deform at high temperatures.
• Exterior plastic parts may be cleaned with a damp cloth. Although these parts are solvent-resistant, NEVER use solvents. Use a soft, dry cloth to remove moisture from the tool before storage.
• Store the tool in its case when not in use. If storing for an extended time, remove batteries before storage to prevent possible damage.
• Do not dispose of this product with household waste.
• Always dispose of batteries per local code.
• Please recycle according to local provisions for collecting and disposing of electrical and electronic waste under the WEEE Directive.

VEVOR Laser Level Specifications

NOTE:

The customer is responsible for the correct use and care of the tool. Moreover, the customer is completely responsible for periodically checking the accuracy of the laser, and therefore for the calibration of the tool.

Made In China