VEVOR 110V Commercial Ice Crusher 440LBS/H Manual

Unlock the full potential of your VEVOR 110V Commercial Ice Crusher 440LBS/H, ETL Approved 300W Electric Snow Cone Machine with Dual Blades, Stainless Steel Shaved Ice Machine with Safety On/Off Switch for Family, Restaurants, Bars with our comprehensive product manual.

This detailed guide is your go-to setup, troubleshooting, and optimization resource. Designed with user-friendliness in mind, the manual provides step-by-step instructions to ensure you can easily assemble and operate your machine.

With clear diagrams and troubleshooting tips, you can swiftly resolve any issues, ensuring consistent performance and longevity of your ice crusher. Download now to enhance your experience and make the most out of your machine, whether at home, running a restaurant, or operating a bar.

VEVOR Commercial Ice Crusher User Manual

Important Assurance

WARNING: Before operating this device, please read this instruction manual thoroughly and keep it handy for future reference. Always follow basic safety precautions when using these devices.

These include:

1. READ All OPERATING INSTRUCTIONS AND PRODUCT SAFETY LABELS! FAILURE TO FOLLOW ALL INSTRUCTIONS MAY RESULT IN SERIOUS INJURY OR PROPERTY DAMAGE!
2. CHECK FOR DAMAGED PARTS: Check whether all parts work normally and perform the expected functions before using the machine. Check for alignment, binding, and installation of moving parts. And any other conditions that may affect the operation. Call the Customer Service number in this manual if any parts are damaged.
3. Always unplug the power cord from the outlet when not in use before removing parts or accessories and cleaning.
4. This appliance can be used by children aged 8 years and above and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning using the appliance safely and understand the hazards. Children shall not play with the appliance. Children shall not make cleaning and user maintenance without supervision.
5. NEVER LEAVE THE MACHINE UNATTENDED WHILE IT IS RUNNING!
6. Wait until all moving parts have stopped, and turn off the power before removing any part from the machine.
7. DO NOT operate electrical equipment with a damaged cord or plug after the unit malfunctions. DO NOT ATTEMPT TO REPLACE THE RECORD. Call Customer Service to arrange to return the machine for examination, repair, or adjustment.
8. DO NOT use outdoors. This product is intended for INDOOR USE ONLY.
9. DO NOT pull the power cord to disconnect.
10.  Keep the appliance and power cable away from heat sources and hot surfaces. The extension cord is not recommended to avoid overheating or fire. Always plug directly into a grounded wall receptacle.
11.  Place the machine on a firm and stable surface. Ensure that the machine is not placed near the edge of the worktop, where it can be easily pushed off or fall.
12. Always protect the power cable from undue flexing and wear–do not allow the cable to hang off the edge of the counter or table.
13. To reduce the risk of unintentional starting, check that the control is off before plugging the cord into the wall outlet. Turn the controller off to disconnect, then remove the plug from the wall outlet.
14. NEVER plug the machine in where water may flood the area.
15. The ice shaver must be installed correctly before use.
16. The ice tray must be installed well before operating the machine.
17. The use of attachments or parts not specifically recommended or sold by the manufacturer for this grinder will void the warranty and may cause fire, electric shock, or injury.
18. DO NOT use the machine for anything other than its intended use. This iceshaver is intended to be used for commercial and similar applications such as: – staff kitchen areas in shops, offices, and other working environments; – by clients in hotels, motels, and other residential-type environments; bed-and-breakfast type environments.
19. The Manufacturer disclaims any responsibility in the case of improper machine use. Improper use of the machine voids the warranty.
20. DO NOT REMOVE WARNING LABELS FROM THE MACHINE. Doing so will void the product warranty and may result in serious personal injury.
21. This appliance must be grounded to protect the operator from electrical shock. This machine uses a grounded, three-prong plug that should be connected directly to a grounded 120V(US)/230V(EC), three-prong grounded wall outlet receptacle. Grounded plugs are used on metal-encased electrical appliances to protect from an electric shock. DO NOT change or alter the plugin anyway.NEVER break off a grounding prong from a 3-conductor plug. Doing so voids the warranty and may result in electric shock.
22. Type Y attachment: If the supply cord is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.

SAVE THESE INSTRUCTIONS!

Commercial Ice Crusher Product Diagram

Handle assembly

1. Place the handle on the top.
2. Screw them together.

Accessories

• Handle*1
• Screw*4
• Screw drive*1
• Spare blade*4
• drain-pipe*1
• Ice shovel*1
• Iron spoon*1
• Plastic bottle*3

Technical Parameters

Ice Crusher Operation Instructions

1. Install the ice shaver as below.

2. Find a flat location for the appliance where it’s protected from direct sunlight and other heat sources (i.e., stove, furnace, radiator). Place the appliance on a level surface. Ensure at least 15cm of space between the back and sides of the appliance and the wall. Don’t place anything on the appliance.

3. The appliance must be positioned where the plug is accessible.

4. Operate the machine as follows:

This machine can only be used to shave ice. This machine is suitable for shaving small ice cubes with a side length of no more than 2-3CM. Large ice cubes may cause the machine to jam or even burn out the motor.

WARNING!

• The blade is very SHARP and operates with care.
• Don’t pour water directly into the hopper and the feed to clean, which will cause an electrical short circuit and increase the risk of a short circuit or electric shock.
• Unplug the ice shaver before cleaning. The use of any appliance must follow basic guidelines, in particular:
  A high-humidity environment will increase the risk of short circuits or electricshock.
• If in doubt, cut off the power to the ice shaver.
• Turn off the machine by the switch, then pull the plug from the outlet.
• Children or disabilities cannot use the ice shaver without adult supervision.

Cleaning and Maintaining the Commercial Ice Crusher

1. Before cleaning or maintenance operations, ensure the mains switch is off, and the supply plug is disconnected from the mains. Accurately clean the equipment and the discs daily for the correct operation and life.
2. After each use, it is necessary to ensure the blade is clean. The clean water can be washed so the blade remains clean and is not contaminated. The service life of the blade is prolonged.
3. Cleaning of internal and external parts
   Note: Unplug the power plug before performing any cleaning or maintenance procedures. Do not use alcohol to clean the ice shaver, which may cause plastic parts to crack.
4. Exterior
   Use a clean, soft cloth to wipe the outside of the ice shaver after each use, and then use a damp cloth moistened with a neutral detergent to remove grease or other impurities.
5. Crushed Ice container cleaning (after each use)
   Immerse the container in a mixture of neutral detergent and water for at least 3 minutes, then rinse with water and dry.
6. The blade belongs to the natural wear part of the equipment. The blade will be worn after cutting a particular time and quantity of ingredients. It is necessary to purchase the blade on time with the corresponding specifications for replacement (Improper operation or cutting too hard ingredients will also damage the blade).
7. Periodically check whether there is a loose set screw, timely tighten the screw, and maintain the machine.
8. Should the machine be idle for a long time, disconnect the main wall switch and clean the machine and its accessories accurately.

Common Malfunction Analysis