VEVOR Electric Car Jack 5 Ton Car Jack Hydraulic, Electric Floor Jack with Electric Impact Wrench Manual

Unlock the full potential of your VEVOR Electric Car Jack 5 Ton with our comprehensive product manual. Designed for ease of use, this manual is your go-to resource for troubleshooting, setup, and optimization of your electric floor jack.

Whether you’re a professional mechanic or a DIY enthusiast, our user-friendly guide provides detailed instructions, step-by-step processes, and valuable tips to ensure you get the most out of your hydraulic jack.

From its impressive 135-360 mm lifting range to its built-in LED light and electric impact wrench, the VEVOR Electric Car Jack covers every feature in depth. With this indispensable tool, car repairs on your SUV, MPV, sedan, or truck are a breeze.

Download the manual now and elevate your car repair experience.

VEVOR Electric Car Jack User Manual

Model: CT05102M005

Specifications

Operating Voltage: DC 12V

Max. Current: 13A

Fuse: 15A

Rated Power: 80W

Max. Torque: 380N.M

Operation

1. Turn on the car’s power.

2. Plug the tool into the cigarette lighter or connect it to the car’s battery.

3. Choose the proper socket and attach it to the wrench’s shaft (FIG.1).

4. According to the thread direction, press the switch to tighten or loosen.
   (Reverse the direction for left-hand threads.) (FIG.2)

5. Press the left side of the switch (marked with ⏚) to loosen nuts. Each nut will loosen after two or three “clatter” sounds.
   Note: If the wrench spins without impacting, please start the engine to ensure maximum voltage.

6. Press the right side of the switch (marked with ⏚) to tighten nuts.
   After two or three “clatter” sounds, the nut will be tight enough.

Electric Car Jack Operation Chart

Choose and apply the correct socket to the wrench head (FIG.1).

Apply the wrench to the wheel nut and press the upper side of the switch (marked “-⏚”) to start. The nut will loosen in about 3 seconds. (FIG.2)

How to Replace the Fuse in the 12V Plug

1. To replace the fuse, twist off the upper cover of the plug.
2. Remove the faulty fuse and insert a new one.
3. Twist the cover back onto the plug. A spare fuse is enclosed in the case.

Caution

You can only use the electric car jack with DC 12V power.

1. Do not use the tool continuously for more than 10 minutes.

2. Do not touch the shaft head during operation.

3. Connect them correctly when using clips to connect to the car battery: red to positive and black to negative.

4. Do not use sockets not included in this kit.

5. Use a replacement fuse with a rated current of 12A or less.

6. Turn off the switch 3–5 seconds after the “clatter” sound is heard before continuing operation.

7. The manufacturer recommends checking the wheel nut tightness with a wheel brace after using the impact wrench.
   This tool is for emergency use only. Use a professional torque wrench to verify proper torque.

8. The manufacturer is not responsible for incorrect use of this product.
   The impact wrench is designed only to loosen and tighten car wheel nuts.

Electric Car Jack Troubleshooting

DANGER – Risk of fatal electric shocks.

Repairs to the electric car jack or its power cord should only be performed by a qualified technician.

1. The impact wrench will not start:

• Is the car battery dead?

• Is the cigarette lighter socket faulty?

• Have you blown the impact wrench?

2. The wheel nut cannot be unscrewed or tightened:

• Has the correct rotational direction been selected?