VEVOR Crimping Tool, AWG10-1/0 Copper Manual

Unlock the full potential of your VEVOR Crimping Tool with our comprehensive product manual. Designed for novice and expert users, this manual provides step-by-step instructions on effectively using the AWG10-1/0 Copper And Aluminum Terminal Battery Lug Crimper.

Covering all 6 wire sizes crimping die, this manual ensures you always achieve professional-grade results. The manual also includes detailed guidance on utilizing the cutting pliers, gloves, 95pcs copper ring connectors, and 100 pcs heat shrink tubes that come with the set.

Whether setting up for the first time, troubleshooting issues, or optimizing your crimping process, this manual is your go-to resource. Download it now to ensure you’re leveraging the full capabilities of your VEVOR Crimping Tool for superior performance and reliability.

VEVOR Crimping Tool User Manual

Models: HX-50B, LK-60A

Warning!

1. Before using this crimping tool, please disconnect the power supply first.
2. Inspect before every use; do not use if damaged.
3. Keep away from children.
4. Before using this product, please understand the crimping specifications of cables and terminals.
5. When using this product, pay attention to keeping the jaw clean.
6. Do not use this product for cables and terminals beyond its crimping range.
7. When using this product, do not put your fingers or anything else in the jaws to avoid injury.

Product description

This product is a high-quality, heavy-duty cable crimper with adjustable jaws. The pliers apply enough pressure to the wire and crimp terminal to bond the two together. In addition, this product is also equipped with a pair of wire cutters for cutting wires and cables.

When using it, you must pay attention to safety warnings, wear personal protective equipment, and follow the correct use method.

Crimping Tool Product Info

Product Structure

Cables crimping pliers are mainly below these parts:

1. Crimping block: used to compress and fix the cable.
2. Spring: used to adjust the crimping block
3. Anti-skid handle: Used to operate the manual wire rope crimping pliers.

The cutting pliers are mainly composed of the following parts:

• Cutting mouth: used to cut wire rope.
• Handle: Used to operate the cutter.

User Guide

Before using this product, please prepare the following tools.

Personal protective equipment, such as protective gloves and goggles.Cables or terminals that require crimping. Lubricant and a clean cloth.

The method of use is as follows:

1. Select the jaw size that needs to be crimped, and rotate the left and right jaws to the corresponding position.
2. Put the cable or terminal to be crimped into the jaw and align it with the jaw gear.
3. Firmly press the handle down until the jaws are fully closed.
4. Keep the handle in compression until the crimping is complete.
5. Release the handle and take out the crimped cable or terminal.

Jaw adjustment method

The jaws of this cable crimper are adjustable. When in use, press down the spring on the clamp head, rotate the left and right jaws to the jaws that need to be crimped at the same time, and then release the spring to fix the jaws

Crimping Tool Repair and Maintenance

1. This product has tightly fitted components. Do not dismantle the components.
2. Avoid knocking the tool and keep it away from moisture.
3. After repeated use of this tool, check the quantity of oil in the oil reservoir.
4. Use ##20 oil for refill. Refilled oils shall be cleared of dust and grit.
5. Unload the fixed handle, pull out the rear oil plug from the oil reservoir, and add ##20 mechanical oil filtered through a 200- filter screen until oil overflows.
6. Loosen the oil valve and slowly turn the movable handle several times to release trapped air in the oil reservoir. Replace the oil plug and screw down the fixing handle.