Homepage » Products » VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual - Image 2
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual - Image 3
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual - Image 4
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual - Image 5

VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual

Adjustable Hole Spacing: The external handle’s hole spacing is adjustable, ranging from 7.87″ to 9″(200 to 228mm). There is no need to redrill. You can utilize existing holes for easy installation. It is perfect for replacement needs. The entry door handle combines style and durability, serving not only as functional hardware but also as an elegant decoration suitable for front doors, rear doors, or office doors.
Built Tough for Longevity: The panel and internal handle are upgraded from stainless steel stamping to zinc alloy die-casting, providing a superior texture and high tensile strength. Our front door handle is highly resistant to rust and corrosion. The reinforced thumb turn and upgraded lever handle with a grooved design prevent handle breakage, ensuring long-lasting durability.
Individually Packaged Components: Each component of the front door handle set is meticulously packaged to prevent loss and minimize the risk of surface scratches due to friction, preserving the overall aesthetic appeal.
Reversible Handle Design: The high-quality front entry door handle is suitable for both left and right-handed doors. It is compatible with standard doors within a thickness range of 1-3/8 to 1-3/4 inches. Feel secure with the external key lock and the internal safety lock.
Easy Installation and Operation: Our exterior door handle is easy to replace with just one screw. The adjustable design with variable hole spacing and latch positions (2-3/8 inches to 2-3/4 inches) makes it convenient to install. Plus, it comes with escutcheons for a stylish upgrade.

Unlock the full potential of your VEVOR Front Door Handle and Deadbolt Set with our comprehensive manual download. Designed specifically for the Satin Nickel Square Handle Set with Lever Door Handle, this detailed guide will help you with every aspect of setup, troubleshooting, and optimization.

Whether you are a DIY enthusiast or a professional installer, our manual offers step-by-step instructions, clear diagrams, and practical tips.

Gain insights into the single cylinder entry door handle’s features, and learn how to adapt the reversible handle for both right and left-handed entrances. Enhance your security and ensure a smooth installation process with our user-friendly, professional-grade manual. Download now to experience the ease and convenience of having all the information you need at your fingertips.

VEVOR Front Door Handle and Deadbolt Set User Manual

Models: 20017-SN-SK / 20017-10B-SK, 82007-10B-SK, 20017-SN/20017-10B, H20017-SN/H20017-10B

Front Door Handle and Deadbolt Installation Instructions

IMPORTANT

  1. Use the components from this package. Make no substitutions.
  2. Consult local building codes for requirements in your area.
  3. Before starting, read all instructions and lay out all parts as shown.

PASSAGE LATCH BACKSET

2 Latches provided: 1 * 2- 3/8’’ (60mm) and 1 * 2 – 3/4” (70 mm)

Select the appropriate latch according to the distance from the door hole to the edge of the door.

Deadbolt Latch Adjustment

(for the lock with a lock cylinder)

DOOR PREP

FOR REPLACEMENT INSTALLATION

Remove all old lock components. Use the template, verify door preparation and make necessary modifications.

FOR NEW INSTALLATION

Follow the instructions on the template.

LATCH INSTALLATION

DEADBOLT IS PLACED IN THE UPPER HOLE; THE LATCH IS PLACED IN THE LOWER HOLE.

Outline both face plates, keeping the edges parallel to the door’s face, and remove the deadbolt and latch from the door edge.

Chisel the outline of each face plate until it is flush with the door edge, 5/32’’ (4 mm) deep.

Insert the deadbolt in the upper edge hole. The hub must be down, and the bolt must be extended. Secure with two wood screws.

Insert the latch in the lower hole with the bevel facing the jamb and secure with two wood screws.

TRIM INSTALLATION

UPPER TRIM: (for the lock with a lock cylinder)

Place the outer trim against the outside of the door.

Tail piece(s) must fit through the hub of the deadbolt in a vertical position.

Attach the inner trim with a 25”(64mm) machine and tighten it securely.

NOTE: IF A SCREW IS INCLUDED, VERIFY THE PROPER FUNCTION OF THE LOCK BEFORE INSTALLING THE TAMPER-PROOF SCREW.

LOWER TRIM

Place the handle set against the outside of the door. The spindle should be inserted through the hub of the latch. Depending on the width of your door, attach the inner knob to the handle set posts with either the 1″(25 mm) or 1.5″(39 mm) trim screws.

Attach the bottom of the exterior handle to the door with a wood screw or captive screw for a metal door at the same backset as a latch.

STRIKE INSTALLATION

UPPER STRIKE

  • Smear coloring on the bolt’s dimple. Retract the bolt and close the door. Extend the bolt, leaving a mark on the door jamb.
  • Drill a 1″(25.4mm) diameter hole, 1-1/4″ (29 mm) deep, in the door frame centered on the mark made from ‘1’.
  • Center strike over hole & trace around strike. Chisel out the door frame until the strike is flush.
  • FOR SECURITY STRIKE: Position the strike with large holes toward the door stop. Pre-drill large holes 3″ (76 mm) deep. Attach wood screws in the smaller holes.

LOWER STRIKE

  1. Partially close the door. Mark a horizontal line on the door frame at the height of the center of the latch bolt.
  2. Measure from the door face (jamb side) to the center of a latch.
  3. Mark a vertical line on the frame at dimension from ‘2’.
  4. Where the lines meet, bore a 1’’ (25.4 mm) diameter hole 5/8’’ (16 mm) deep.
  5. Center strike screw holes on the vertical center line and outline strike.
  6. Chisel out the wood so the strike is flush with the frame.
  7. Install with two wood screws.

VEVOR Front Door Handle and Deadbolt Set, Matte Black Front Door Lock Set with Interior Knob, Adjustable Hole Spacing Single Cylinder Handleset, for Right and Left Handed Entrance and Front Door
VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Front Door Lock Set with Interior Knob, Adjustable Hole Spacing Single Cylinder Handleset, for Right and Left Handed Entrance and Front Door
VEVOR Front Door Handle and Deadbolt Set, Front Door Lock Set with Interior Knob, Adjustable Hole Spacing Single Cylinder Handleset, for Right and Left Handed Entrance, Brushed Oil Rubbed Bronze

Recommended For Your Project

 

VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual

Reviews

There are no reviews yet.

Be the first to review “VEVOR Front Door Handle and Deadbolt Set, Satin Nickel Manual”

Your email address will not be published. Required fields are marked *

Related products

Scroll to Top