VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual

VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual - Image 2

VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual - Image 3

VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual - Image 4

VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual - Image 5

VEVOR Board Cutter Drill Attachment 360 Degree Pivoting Head Manual

Powerful & Precise Cutting: The maximum cutting thickness for fiber cement board is 0.5″ / 13 mm. Our board cutter drill attachment easily cuts various materials, including plasterboard and fiber cement board. It is crafted to slice through smaller shapes with a minimum cutting radius of 1″ effortlessly.
Built to Last: The head of the board shears attachment is made of special spring steel with a hardness of HRC53, resistant to deformation and breakage. It can maintain the sharpness of the blade during long-term use, thereby extending the service life of the blade.
Flexible Operation: With a 360-degree rotating head, the board shears drill attachment can be adjusted to the desired position, providing comfortable cutting from any angle or direction. It is ideal for cutting straight lines, large curves, circles, and irregular shapes.
Smooth & Comfortable Usage: Thanks to our thoughtful universal bracket design, you can enjoy minimal machine vibration. This board shear attachment for drill minimizes fatigue while providing mobility and user-friendliness.
Broad Compatibility: Power your creativity with our board-cutting tool that fits perfectly with 18V-20V cordless drills, impact drivers, and impact drills. The standard 1/4 ” hex shank makes the connection a breeze.

Description
Reviews (0)

Unlock the full potential of your VEVOR Board Cutter Drill Attachment with our comprehensive product manual download. This indispensable guide covers everything you need to know about using your Board Shears Attachment, featuring a 360-degree pivoting Head for precision cutting.

Whether you need to cut up to 0.47″ plasterboard or 0.5″ fiber cement, this manual provides detailed setup, troubleshooting, and optimization instructions.

Designed to work seamlessly with most 1500-3000, RPM electric drills, our manual ensures you can maximize the efficiency and lifespan of your tool. With easy-to-follow steps and clear illustrations, this guide is perfect for both beginners and seasoned professionals. Download now to ensure you get the best performance from your VEVOR Board Cutter Drill Attachment.

VEVOR Board Cutter Drill Attachment User Manual

Model: DR24

Product Specifications

VEVOR Board Cutter Drill Instructions

WARNING: READ AND UNDERSTAND THESE INSTRUCTIONS, and the instructions for the power tool used with this product.

FAILURE TO FOLLOW all instructions listed may result in electric shock, fire, and/or serious personal injury. CUTHAZARD-Never have any part of your body near the blades or moving parts of the power tool. Serious personal injury may occur.

Before use, ensure the shear attachment is properly attached to the tool.
Turn the tool OFF and/or disconnect the battery pack before installing and removing accessories, before adjusting or when making repairs.
To prevent accidental operation, lock the trigger switch in the OFF position when the tool is not in use or when storing the tool.
DO NOT sharpen blades.
DO NOT use the shear with any kind of accessory or attachment.
Wear gloves when handling sheet metal. The edges are sharp and can cause serious personal injury. For best results, always clamp or anchor the material to be cut.
DO NOT use under wet conditions or in flammable liquids or gases.
DO NOT let children come into contact with the shear. Supervision is required when inexperienced operators use this tool.
DO NOT hold the shear attachment as a primary gripping surface.
Make sure the power tool is set to the“forward”(clockwise) direction before use.
Hold the power tool on insulated gripping surfaces (if a drill uses both hands). The shear contacting a live wire may make exposed metal the shear and the power tool“live” and could give the operator an electric shock.
AVOID body contact with earthed or grounded surfaces, such as pipes and appliances. There is an increased risk of electric shock if your body is earthed or grounded.
DO NOT use solvents or harsh chemicals to clean the shear’s non-metallic parts. These chemicals may weaken the plastic materials used in these parts. Use the cloth dampened only with water and mild soap.
DO NOT let any liquid get inside the shear or immerse any part of the shear into a liquid.
DO clean your shear attachment frequently to avoid damage or jams caused by too much dust or fragments.

Installing and Operating the Board Cutter Drill

1. Insert the shank end of the shears into the nose of the impact driver, or chuck, if using a drill. Tighten the chuck securely.

2. Pivot the telescoping clamp toward the back of the tool and adjust the clamp (both width and length) to fit securely on the tool.

Adjust the width by turning the nut(1) on the clamp’s left side. Rotate the nut clockwise/ counter-clockwise to reduce/increase the width.

Rotate the knobs(3) on both sides to loosen the clamp. Then adjust the length of the clamp by pulling or pushing on the length-adjusting lever (4) of the telescoping clamp.
Lock at the desired length/width by pushing the lock(2) at the end of the telescoping clamp.

3. Ensure the shear is secure on the tool.

How to Operate Your Shear

1. For an attractive hand-cut appearance, hold the tile piece finished-side-up when using the drill attachment to make straight, angled, or curved cuts in natural roofing slate.

2. Start angled cuts at the narrow end to avoid chipping off the point.

3. Ensure that the shear’s padded skid plate is flush to the tile and that the shear attachment operates at a drill speed of 1400 to 2000RPM.

4. The ideal thickness of fiber cement board to be cut is around 4-8mm.

5. The assembly of the telescoping clamp and shear attachment is shown below. It fits 1/4-1/2 in.(6.35-12.7 mm) drills including 1/4 in.(6.35 mm) Quick Release Chucks.