VEVOR Mounted Gun Safe for Pistols, Biometric Gun Safe Manual

Unlock the full potential of your VEVOR Mounted Gun Safe for Pistols with our comprehensive product manual. This detailed guide is crafted to help you seamlessly set up, troubleshoot, and optimize your Biometric Gun Safe, ensuring maximum security and convenience.

Featuring easy-to-follow instructions and clear illustrations, our manual covers every aspect of your Handgun Safe, from initial setup to daily operation.

Whether you prefer accessing your safe via fingerprints, passwords, or keys, this guide ensures you understand all three quick access methods. Perfect for home, bedside, nightstand, or wall mounting, the VEVOR Mounted Gun Safe manual is your go-to resource for ensuring your pistol is always secure and accessible when you need it most. Download now for a user-friendly experience that enhances your safe’s functionality and security.

VEVOR Mounted Gun Safe User Manual

MODEL: AL370

Important Safeguards

Warning: To reduce the risk of injury, the user must read the instructions manual carefully. Failure to do so can result in serious injury.

Use precautions

1. DO NOT SIT, STAND OR CLIMB ON THIS ITEM.
2. This product is not a toy. Do not allow children to play with or near this item.
3. Use as intended only. Keep away from sharp points, blades, and other items, so as not to scratch the product.
4. Flammable: Keep away from open flame. This product will ignite and burn if exposed to an open flame.
5. Battery Replacement: When the batteries are not high enough, and must be replaced immediately. To replace the batteries, turn off the handgun safe first. Replace the old batteries with new ones of the same type, make sure that the polarity connections are correct (see the polarity indications at the bottom of the battery compartment).
   Reinstall the battery cover.

SAVE THESE INSTRUCTIONS

Product Parameters

Parts List

Thank you very much for choosing this mounted Hand Gun Safe. Please read all of the instructions before using it. The information will help you achieve the best possible results.

Adjusting the Foam

There are two slots cut into the foam inside the Gun Safe. Before installing the gun safe, adjust the slots on the foam to fit the size of your gun.

• Take out the little foams of the slots.
• Cut little foams to adjust your gun size.
• Put the cut foams back into the slots to hold your gun firmly.

Battery Installation

To get started, ensure the bottom of the safe and the door aren’t obstructed before opening.

1. Insert one of your backup keys into the keyhole at the front of the gun safe. Push the key in and turn it counterclockwise to open the gun safe.
   (Note: Do not lock the key inside the safe- this is an emergency key and will open the safe if you have lost your code.)
2. Locate the battery compartment inside the gun safe, and pull out the battery compartment.
3. Inserting 4 x AA batteries into the battery compartment goes against the spring inside of the compartment.
   Pay attention to the batteries’ + and – signs.
4. Repeat the above steps for battery replacement.

Battery Warnings

• Always insert batteries correctly about polarity (+ and -) as marked on the battery and the product.
• Exhausted batteries should be immediately removed from the product and properly disposed of.
• Do not mix old and new batteries.
• Do not mix alkaline, standard(carbon-zinc), or rechargeable (ni-cad,ni-mh, etc) batteries.

Low Battery Warning

If the indicator light lights up red 6 times with 6 times beeps when opening the Gun Safe electronically, your battery level is critically low, and your Gun Safe needs to be replaced with 4 new batteries.

Factory Reset Code

Factory preset code: 1234.

Factory preset fingerprint: blank(Unregistered fingerprints cannot be unlocked)

Enter the factory code 1.2.3.4, and the green LED will light up.

Important:

All safe models initially work with the safe code 1.2.3.4. Therefore, resetting your safe with a new user code you have personally selected is essential to provide maximum security.

How to Set User Code

• Press the “program button” until you hear 2 beeps and the green light flashes twice, you can start to set your user code with 3-6 digits long.
• Press the “program button” again to confirm the user code. When you hear 2 beeps and the green light flashes twice, the new code has been set successfully.

Set Primary User Fingerprint

• Press the “program button” until you hear 2 beeps and the green light flashes twice. Put one finger on the fingerprint scanner.
• Repeat 4 times. When you hear 2 beeps and the green light flashes twice, the main user fingerprint has been successfully set.(A total of 100fingerprints are available. The setup method is the same as for the primary user fingerprint.)

Note: You only have 10 seconds to set the code or fingerprint. When you hear 2 beeps and the red light flashes twice, the code or fingerprint setting fails.

Error Alarm

Enter the wrong password 3 times or fingerprint 5 times, the buzzer alarm for 30 seconds, and all buttons/fingerprints are invalid when the alarm sounds.
The panel locks for one minute. Press any button or fingerprint, you will hear 3 beeps and the red light flashes 3 times. The gun safe can still be opened using the backup keys. After one minute, the gun safe will resume normal operation with a single beep sound, and the indicator light will flash green.

If the input is wrong again, the buzzer alarms for 30 seconds, and the panel is locked for 5 minutes.

Note: The 30-second buzzer alarm is not affected by the mute mode.

Mute Function

Press the “4” button for more than 2 seconds, the green light flashes, it means the mute function is on/off.

Restore Factory Settings

Press the set button until you hear a beep; the reset is successful.

Mounting Your Gun Safe

Use proper drilling tools and mounting hardware based on the type of surface you mount the gun onto safely. Supplied screws are intended to be used on wooden surfaces. Ensure you have enough clearance for the lid to open properly before mounting the gun safely.

1. Open the box and take out the mounting bracket and screws.
2. Use the included 4x mounting screws to install the bracket onto the desired place.
3. Slide the gun safe onto the bracket mounting hook, and fix the gun safe to the bracket with a thumbscrew from inside the gun safe.
4. Close the gun safe. Now the gun safe should be ready for use. Your Vevor gun safe will automatically lock when you fully close the lid.

The bracket can be installed on the left or right of the gun safe, but the thumbscrew must be attached to the bracket.

Do not let the gun safe door face the floor when you mount the gun safe vertically to avoid damaging your property.

Correct Disposal

This product is subject to the provisions of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union.

Products marked as such may not be discarded with normal domestic waste but must be taken to a collection point for recycling electrical and electronic devices.