VEVOR Solar Barn Light, 3 Lighting Modes Manual

Unlock the full potential of your VEVOR Solar Barn Light with our comprehensive product manual. This detailed guide is designed to help you easily set up, troubleshoot, and optimize your new solar-powered lighting solution. Our manual covers all the essential aspects, from understanding the three lighting modes and motion sensors to the dusk-to-dawn functionality.

Whether you’re installing these stylish gooseneck lights on an exterior farmhouse, garage, shed, patio, or any outdoor wall, our step-by-step instructions ensure a seamless setup.

The manual also provides valuable tips for maximizing the performance of your IP65 waterproof lights, making them perfect for any outside yard or street. Download now to ensure you get the best out of your VEVOR Solar Barn Light, enhancing both security and aesthetic appeal.

VEVOR Solar Barn Light User Manual

MODEL: AX-EJD

Do not install in a location without direct sunlight. The solar lamp will not work correctly at night if the photovoltaic panel cannot receive sunlight.

How to Install

1. Cover the solar panel or place the light in a dark environment, turn on the switch to check if the light works normally.

2. As shown in the figure, justify the groove part to fix the connector.

3. Thread the bracket through the mounting base.

4. Fix the bracket and base together with nuts

5. Use long screws to fix the base at the position you need to install, unplug the blue cover, and connect the light head with the bracket.

6. Fix the light head and the bracket firmly with screws.

Solar Barn Light Lighting Modes

Select mode by pressing the white button.

Press the white button to turn on the switch, and the first mode is autodusk-to-dawn; the light will remain dimmed all night, regardless of whether the sensing range of the light detects motion.

When motion is detected nearby, the light will display 60% brightness; if no motion is detected within 20s, it will display 30%brightness.

At night, the lamp will remain OFF until the sensor detects nearby movement, then turn to 100% brightness. The light will turn OFF after no motion is detected within 20 seconds.

NOTE: When using it for the first time, if the wall lantern does not light up, please place it in direct sunlight to charge it for 8hours.

Frequently Asked Questions

Why does my light not come on at night?

(1) Make sure the switch is ON (White button). Light can only be charged when the switch is turned on.

(2) Make sure that the location you install does not have shade or eaves that block the sun.

(3) Make sure that there are no other light sources above the solar panel at night, such as street lights.

Does the solar panel require the direct sun to charge?

The solar panel must be installed where it can receive full
direct sunshine (when available), and usually set the solar panel facing south at an appropriate angle. The solar panel must not be installed in a shaded or part-shaded location.

What type of battery does my solar hanging light require to operate?

The solar barn light requires one Lithium-ion 3.7V 1500mAh battery, battery model: 18650.

Can I use any regular bulb for the solar barn light?

Only bulbs purchased through Aulanto can be used for this product.

IF THE LIGHT DOES NOT TURN ON AT DUSK AFTER 6-8 HOURS OF CHARGING:

1. Unscrew the three fixing screws as shown in the picture.
2. Uncover the lampshade gently upward.
3. Check whether the internal circuit is off, loose, etc.

List of Accessories

1. Products*1
2. Instructions*1
3. Plastic Expansion(4.5mm*35mm)*2
4. Galvanized Screws(4.5mm*30mm)*2
5. Irons*1
6. Install the Round Iron Disc *1
7. Ironed Fixing Nut *1
8. The Lamp Body Fixes the Plastic Parts *1
9. The Lamp Body Fixing Rubber Part Screw(4*12mm) *1
10. Dense Bags *1