VEVOR Hitch Mount Cargo Carrier, 45.3″ x 25.6″ Aluminum Manual

Unlock the full potential of your VEVOR Hitch Mount Cargo Carrier with our comprehensive product manual. Designed specifically for the 45.3″ x 25.6″ Aluminum Hitch Cargo Rack with Folding Ramp, this manual provides step-by-step guidance for setup, troubleshooting, and optimization.

Whether installing the hitch rack basket, securing the stabilizer and straps, or loading a 500LBS mobility scooter, our user-friendly manual ensures you get the most out of your 2″ hitch receiver.

With detailed diagrams, safety tips, and maintenance advice, this manual is an essential tool for maximizing the performance and longevity of your cargo carrier. Download your copy today and experience the convenience and peace of mind that comes with having all the information you need at your fingertips.

VEVOR Hitch Mount Cargo Carrier User Manual

MODEL: GJ0020

Safety & Warning

• Read and understand this entire manual before assembling, installing, operating, or servicing this product. Failure to follow these warnings and instructions can cause death, personal injury, or damage to valuable property.
• When using this product, adhere to all Department of Transportation (D.O.T.) requirements. Use ropes and tie downs (not included) to hold all cargo in place securely.
• For the vehicle supporting the Cargo Carrier, read all pertinent vehicle instructions and warnings in the owner’s manual. Ensure the vehicle’s engine is OFF, with parking brakes set, before loading or unloading the Cargo Carrier.
• This Cargo Carrier must be attached to a 2″ x 2″ Class III or Class IV hitch receiver. The hitch must be properly installed by qualified service technician and be certified to support the weight of this CargoCarrier and its contents.
• This Cargo Carrier is designed to haul firewood, coolers, and other similar loads. Do not modify the Carrier and do not use this product for purposes that it was not designed for.
• Do not overload the Cargo Carrier. Never exceed the maximum weight capacity.
• When assembly is complete, check and test all vehicle systems, including lights and brakes; make sure no damage occurred during product installation.
• Frequently check the condition of the Cargo Carrier and the vehicle’s hitch receiver. Make sure all components are in good condition. If the Cargo Carrier or hitch receiver becomes damaged through an accident or if any weld damage is noted, the product should be replaced. Check to make sure that all hardware is tightly secured in place. Keep the Cargo Carrier clean.
• Use common sense when working. Stay alert and concentrate when setting up and using the Cargo Carrier. Never work while under the influence of alcohol, drugs, or medications.
• Keep the work area clean and well-lit while assembling and using the Cargo Carrier. Keep spectators and children out of the work area.
• Dress appropriately. Never wear loose-fitting clothing or jewelry when working. Contain long hair, and keep hair, clothing, and gloves away from moving parts.
• Be aware of the danger of ”dynamic loading. This situation arises when a load is dropped onto the Carrier, resulting in excessive short-term load. Dynamic loading can damage and fail the Carrier and/or hitch receiver, and cause personal injury to the person loading the Carrier.
• Never load people or animals into the Cargo Carrier.
• The weight inside the Cargo Carrier should be evenly distributed, with heavier items positioned towards the center of the Carrier.
• Note the position of the vehicle’s exhaust pipes before setting up the Cargo Carrier. Ensure exhaust pipes are not close to the Cargo Carrier; flammable goods in the Cargo Carrier could catch fire due to exhaust heat. Do not use the cargo carrier if this risk exists in your vehicle.
• Do not ride in the vehicle being loaded or unloaded. Load and unload the car slowly, according to the manual instructions.

Specifications

Installation Guide

When the ramp is erected, as shown in the picture.

When the ramp is folded, as shown in the figure

Parts List

Cleaning And Maintenance

• For cleaning, wipe the surface with a damp (not wet) cloth or wipe dry with a clean lint-free cotton cloth.
• Window or a similar cleaning liquid can be used to clean the surface.
• Regularly inspect and tighten the relevant fasteners.