











With the VEVOR 5 gallon copper still with thumper, you can make high-quality spirits at home. This whole distillation set comes with a cooling pot, thumper keg, and 5-gallon fermentation barrel made of food-grade SUS201 stainless steel. It is ideal for personal distilling projects or small-batch distilling due to its large 19-liter capacity.
From start to finish, the fermentation barrel manages everything. By releasing the gases created during fermentation, a unidirectional exhaust valve lowers internal pressure and avoids hazardous accumulation. Gas stoves, electric heating sources, and wood fires all function with the thickened stainless steel bottom without warping.
It's the sophisticated secondary distillation system, along with the thumper, that distinguishes this 5 gallon copper still from other simple distillers. By introducing an additional purification step between the fermentation barrel and cooling pot, the thumper keg significantly enhances your finished product. Alcohol vapour goes through a second distillation process in the thumper, which liquefies and precipitates contaminants to produce spirits with a higher proof and cleaner flavour profiles.
This secondary process yields moonshine and whiskies with an alcohol content comparable to that of commercial products. Additionally, the thumper keg creates innovative opportunities for flavour development. To add diverse flavours to your spirits without sacrificing purity, you can add wood chips, fruits, herbs, or spices straight into the thumper.
Cooling efficiency affects both the speed and quality of your distillation operation. For quick temperature reduction, the VEVOR 5 Gallon Copper Still with Thumper has high-quality copper coils with a large contact surface area and exceptional thermal conductivity. The interior's smooth, wrinkle-free surface inhibits the accumulation of residue from water, essential oils, and distilled alcohol, preventing the formation of bacteria and undesirable aftertaste.
With inlet and outlet valves that allow you to adjust flow rates for maximum efficiency, the integrated 8W water pump continually circulates cooling water throughout the system. Compared to gravity-fed designs, the circulation system uses less water and keeps the cooling constant over long distillation cycles. Your vapour will condense rapidly and fully due to the combination of high-grade copper construction and active water circulation, which maximise yield while maintaining flavour quality.
For distillation to be successful, temperature control is essential, and this five-gallon copper still with thumper makes monitoring easy. With a range of 50°F to 400°F (0°C to 200°C), the dual display thermometer simultaneously displays readings in both Fahrenheit and Celsius. This broad spectrum encompasses all phases of the distillation procedure.
Since different substances vaporise at various temperatures, it is crucial to understand temperature. Water needs 212°F to convert to vapour, whereas alcohol does so at about 173°F. With careful observation of the thermometer, you can eliminate the tails with off flavours, gather the hearts with the best flavour, and separate the heads with unwanted compounds. With the help of the transparent dual display, you may work with any measurement system without having to perform conversion calculations.
Appropriate sealing is essential for both efficiency and safety, and this copper continues to provide both. Water vapour cannot escape from corrugated pipe connections thanks to silicone leak-proof plugs, which lowers the danger of burns and increases distillation efficiency. For optimal yield and purity, the safe connections ensure that all of your alcohol vapour travels along the correct route.
This design guarantees ideal distillation performance and sanitary fermentation conditions. Use the supplied wrench to tighten all connections securely during assembly. For added security, some users tape screw connections with plumber's tape. At copper-to-lid connections, the flour and water mixture method offers an extra seal if needed. While guaranteeing effective transformation of your mash into premium spirits, the extensive sealing system keeps you safe during use.
When purchasing distillation equipment, build quality is important. The VEVOR 5 gallon copper still with thumper is made entirely of food-grade SUS201 stainless steel. Through hundreds of cycles of heating and cooling, this material retains its structural integrity while fending against corrosion from acidic mashes and alcohol vapours. Your spirits will remain uncontaminated by metal, thanks to the stainless steel structure.
The entire system weighs only 9.0 pounds (4.1 kg), making it easy to transport between storage and the distillation site. Strength is not compromised by the lightweight design because, even when heated by direct flame, the reinforced bottom prevents warping. The smooth finish prevents residue accumulation and bacterial growth, and the stainless steel surfaces are easy to clean after each run.
This 5-gallon copper still with thumper offers all the essentials for success, regardless of whether you are upgrading from entry-level equipment or just beginning your distilling career. The full kit guarantees that every component functions flawlessly and removes any uncertainty regarding compatibility. Seasoned distillers value the thumper keg's superior capabilities, while novices appreciate its simple installation and easy operation.
The system manages a variety of uses outside of moonshine. Produce distilled water for consumption or lab use by distilling fruit wines, rum, whisky, vodka, and brandy. Essential oils can still be extracted from flowers and herbs using copper, opening up new opportunities for aromatherapy and the production of natural perfumes. Genuine users successfully create artisan spirits, impressing visitors and demonstrating their commitment to excellence.